Machines for sale

This is only a part of the machines we can offer directly from factories around the world. If you have any requirements for machines or have any machines for sale, please let us know.

Please click the green text for the list of available corresponding lines or machines.

Complete lines:

Needling lines

Thermobonding lines

Needling+thermobonding lines (needling lines with oven)

Airlay lines

Stitch-bonding lines

Spunbond lines

Meltblown lines

Spunlace lines and machines

Staple fiber production lines

Coating, impregnation, lamination lines and machines

Preparation:

Carding willows

Bale openers

Fine openers and openers

Blending boxes

Mixers

Opening lines

Cards with cross-lappers:

Single doffer cards with cross-lappers

Double doffer cards with cross-lappers

Airlay systems

Cards:

Single doffer cards

Double doffer cards

Cross-lappers

Drafters

Needle looms:

Pre-needle looms

Finishing needle looms

Structural needle looms

Stitch-bonding machines

Ovens

Calenders

Padders (foulards)

Winders, unwinders, cutting machines, cutting and winding units, slitter/rewinders, accumulators, roll packaging machines and lines:

Winders, unwinders

Cutting machines

Cutting and winding units

Slitter/rewinders

Accumulators

Roll packaging machines and lines

Recycling:

Tearing machines and lines

Rotary cutters

Guillotine cutters

Edge trim openers

Garnetts

Bale presses:

Vertical bale presses

Horizontal bale presses

Other nonwoven and related machinery

—————————————————————————————–

Complete lines:

Needling lines

CODE: CL33032 – Needling line, yoc: 1980s, ww: 2.2 m (Click Here For Details) Photos

Consisting of:

1 Bonino single doffer card, yoc; 1980s, ww: 2.2 m
1 Bonino cross-lapper, yoc: 1980s, input: 2.2 m, output: 2.2 m
1 Tecnica Tessile pre-needle loom, yoc: 1980s, ww: 2.4 m, single board downstroke, 400 needles/m, 500 rpm
1 Dilo OUG II 25 finishing needle loom, with CBF, with winder, yoc: 1988, ww: 2.5 m, double board downstroke, double board upstroke, 16 000 needles/m, 1 300 rpm
1 cutting and winding unit

CODE: CL33027 – Needling line, yoc: 1982-1995, with upgraded electronics, ww: 2.2 m (Click Here For Details) Photos

Consisting of:

2 Laroche bale openers, yoc: 1994, ww: 1.5 m
1 Laroche pre-opener, yoc: 1994, ww: 1 m
1 Tatham double doffer card, yoc: 1982, ww: 2.8 m
1 Tatham cross-lapper, input: 2.8 m, output: 2.2 m
1 Asselin 169 pre-needle loom (drum tacker), ww: 2.2 m
1 Fehrer NL 9/S pre-needle loom, yoc: 1995, ww: 2.2 m, single board downstroke, 5 181 needles/m
1 Fehrer NL 21/R finishing needle loom, yoc: 1982, ww: 2.2 m, double board upstroke, 14 000 needles/m
1 Fehrer NL 21/R finishing needle loom, yoc: 1984, ww: 2.2 m, double board downstroke, 10 000 needles/m
1 cutting and winding unit

CODE: 827A82K – Needling line, ww: 1965-1978, ww: 2.5 m (Click Here For Details) Photos available upon request

Consisting of:

1 Grassi rotary cutter, ww: 600 mm
1 Vergnasco double drum tearing machine, ww: 720 mm
1 OCTIR single doffer card, yoc: 1965, ww: 2.2 m, avantrain + 2 swifts
1 Cormatex cross-lapper, yoc: 1978, input: 2.5 m, output: 3.4 m
1 Automatex pre-needle loom, ww: 2.5 m, 2 500 needles/m, stroke: 60 mm
1 cutting and winding unit

CODE: CL33010 – Needling line, yoc: 1986, ww: 3 m (Click Here For Details) Photos

Consisting of:

1 Spinnbau double doffer card, ww: 2.5 m, avantrain + 1 swift, randomizing cylinders
1 Autefa cross-lapper, input: 2.5 m, output: 3.5 m
1 Dilo OD I 35 pre-needle loom, with CBF, ww: 3.5 m, single board downstroke, stroke: 60 mm, 4 000 needles/m, 1 200 rpm
1 Dilo OD II 35 finishing needle loom, ww: 3.5 m, double board downstroke, stroke: 40 mm, 8 000 needles/m, 1 200 rpm
1 Dilo OUG II 30 finishing needle loom, ww: 3 m, double board downstroke, double board upstroke, stroke: 40 mm, 16 000 needles/m, 1 200 rpm
1 Dilo OUG II 30 finishing needle loom, ww: 3 m, double board downstroke, double board upstroke, stroke: 40 mm, 16 000 needles/m, 1 200 rpm
1 Dilo accumulator, ww: 3 m
1 Dilo cutting and winding unit, ww: 3 m
Up to 400 kg/h

CODE: YESD991 – Needling line, yoc: 1990 – refurbished in 2018, ww: 3.4 m (Click Here For Details) Photos

Consisting of:

1 bale opener, ww: 2 m
1 Bematic fine opener, yoc; 2018, ww: 2 m
1 FOR single doffer card, ww: 2.5 m, avantrain + 1 swift
1 Autefa cross-lapper, yoc: 1990, input: 2.7 m, output: 3.5 m
1 Fehrer pre-needle loom, ww: 3.5 m, 1 500 needles/m, stroke: 60 mm
1 Fehrer NL 21/R finishing needle loom, ww: 3.7 m, double board upstroke, 8 000 needles/m
1 longitudinal cutting and winding unit, ww: 3.4 m

CODE: 52HS88X – Needling line, yoc: 2003, ww: 3.6 m (Click Here For Details) Photos available upon request

Consisting of:

2 Temafa bale openers
1 Temafa carding willow
1 Spinnbau double doffer card, ww: 2.5 m
1 Autefa CL 4000 cross-lapper, output: 4 m
1 Dilo pre-needle loom, ww: 3.8 m
2 Dilo finishing needle loom, ww: 3.6 m
1 cutting and winding unit

CODE: 6260HSX – Needling line, yoc: 1993-2005 – refurbished 2015-2023, ww: 4 m (Click Here For Details) Photos available upon request

Consisting of:

4 Trützschler bale openers, yoc: 2000 – refurbished in 2015, ww: 1.2 m
4 Trützschler mixing opener, yoc: 2000 – refurbished in 2015
1 Trützschler fine opener, yoc: 1994 – refurbished in 2015
1 Reisky & Schlese double doffer card, refurbished in 2015
1 Reisky & Schlese cross-lapper, output: 4.5 m
1 drafter, yoc: 2000 – refurbished in 2015, ww: 4.3 m
1 Dilo Di-loom OUG II S finishing needle loom, with CBF, yoc: 1993 – refurbished in 2023, ww: 4 m, double board, 9 000 needles/m
1 cutting and winding unit, yoc: 2005 – refurbished in 2015, ww: 4 m
1 Temafa edge trim opener, yoc: 2005 – refurbished in 2016
1 Temafa carding willow, ww: 1 m

CODE: CL33028 – Needling line, yoc: 1987, with upgraded electronics, ww: 4 m (Click Here For Details) Photos

Consisting of:

2 Hergeth Hollingsworth bale openers, ww: 1 m
1 Bonino bale opener, ww: 700 mm
1 Thibeau single doffer card, ww: 2.4 m
1 Asselin cross-lapper, input: 2.9 m, output: 4 m
1 Asselin DF 1 500 pre-needle loom (drum tacker), ww: 4 m
1 Asselin SD 41 finishing needle loom, ww: 4.1 m, double board downstroke, 5 600 needles/m
1 Asselin DF 41 finishing needle loom, ww: 4.1 m, double board downstroke, double board upstroke, 11 200 needles/m
1 cutting and winding unit

CODE: CL32992 – Needling line, yoc: 1996-2002, ww: 4.2 m (Click Here For Details) Photos

Consisting of:

1 Bematic single doffer card, yoc: 2002, ww: 3 m, with randomizing cylinders
1 Tectex cross-lapper, yoc: 2002, input: 3 m, output: 4.5 m, up to 40 m/min
1 2N (TecTex) NS-3000 pre-needle loom, yoc: 1996, ww: 4.2 m, single board downstroke, 3 333 needles/m
1 cutting and winding unit, ww: 4.5 m
Up to 600 kg/h
Optional: Trützschler opening line, yoc: 1983, ww: 1 m, consisting of: 4 Trützschler MWS bale openers, 1 Trützschler mixing opener

CODE: 38HH871 – Needling line, yoc: 2000-2001, ww: 4.4 m (Click Here For Details) Photos

Consisting of:

5 Temafa bale openers
1 FOR Injection double doffer card, ww: 3 m
1 Asselin Dynamic 500 030 cross-lapper, input: 3 m, output: 4.8 m
1 Asselin batt feeding system, ww: 4.8 m
1 Andritz (Asselin) A50R SD2 finishing needle loom, ww: 4.8 m, double board, stroke: 60 mm, 11 560 needles/m, 1 300 rpm
1 Autefa (Fehrer) NL 21/S finishing needle loom, ww: 4.4 m, stroke: 40 mm, 15 000 needles/m, 1 800 rpm

CODE: CL33026 – Needling line, yoc: 1972-1985 – upgraded with PLC in 2016, ww: 4.4 m (Click Here For Details) Photos

Consisting of:

1 FOR single doffer card, yoc: 1972, ww: 2.4 m
1 Asselin cross-lapper, yoc: 1985, input: 3 m, output: 5 m
1 Fehrer NL 12 finishing needle loom, with batt feeding system, yoc: 1970, ww: 4.88 m, double board downstroke, 3 960 needles/m
1 Fehrer NL 12 finishing needle loom, yoc: 1970, ww: 4.4 m, double board downstroke, 5 004 needles/m
1 accumulator, ww: 4.6 m
1 winder, ww: 4.6 m
Up to 250 kg/h

CODE: CL33030 – Needling line, yoc: 1975-2015, electronics from 2015, ww: 4.5 m (Click Here For Details) Photos

Consisting of:

1 Thibeau double doffer card, yoc; 1982, ww: 2.5 m, avantrain+2 swifts
1 Automatex cross-lapper, input: 2.5 m, output: 5 m, up to 45 m/min
1 HDB pre-needle loom, yoc: 1975, ww: 4.5 m, double board downstroke, 5 000 needles/m, 400 rpm
1 Bombi double cylinder thermobonding calender, yoc: 2015, ww: 4.5 m
1 cutting and winding unit
Up to 500 kg/h

CODE: CL33029 – Needling line, yoc: 1991-2006, with upgraded electronics, ww: 4.7 m (Click Here For Details) Photos

Consisting of:

3 Masias bale openers, yoc: 1998, ww: 1.5 m
1 Masias fine opener, yoc: 1998, ww: 1.6 m
1 Masias double doffer card, yoc: 1991, ww: 2.8 m
1 Asselin cross-lapper, yoc: 1991, input: 2.8 m, output: 4.7 m
1 Karl Mayer Malivlies stitch-bonding machine, yoc: 2005, ww: 5 m
1 Asselin SD 47 pre-needle loom, with batt feeding system, yoc: 1995, ww: 4.7 m, single board downstroke, 5 106 needles/m
1 Asselin SM 47 finishing needle loom, yoc: 1995, ww: 4.7 m, double board upstroke, 8 714 needles/m
1 Asselin DF 47 finishing needle loom, yoc: 1995, ww: 4.7 m, double board downstroke, double board upstroke, 17 429 needles/m
1 Bombi double cylinder thermobonding calender, yoc: 2006, ww: 5 m
1 cutting and winding unit
1 Laroche edge trim opener

CODE: CL33014 – Needling line, yoc: 1984-2001, ww: 5 m (Click Here For Details) Photos

Consisting of:

1 HDB single doffer card, yoc: 1984, ww: 2.5 m
1 Autefa cross-lapper, yoc: 2001, input: 2.5 m, output: 5 m
1 Dilo Di-loom OD II 50 finishing needle loom, with CBF, yoc: 1991, ww: 5 m, double board downstroke, stroke: 40 mm, 6 000 needles/m, 1 000 rpm
1 Dilo Di-loom UD II 50 finishing needle loom, yoc: 1991, ww: 5 m, double board upstoke, stroke: 40 mm, 6 000 needles/m, 1 000 rpm
1 Dilo longitudinal cutting and winding unit, ww: 5 m
1 Temafa edge trim opener
Up to 260 kg/h

CODE: MNDA661 – Needling line, yoc: 2015, ww: 7 m (Click Here For Details) Photos

Consisting of:

1 Spinnbau double doffer card, ww: 3.2 m, avantrain + 1 swift
1 Dilo cross-lapper, input: 3.2 m, output: 7 m
1 Dilo Di-loom OD II AB 70 finishing needle loom, with CBF, ww: 7 m, double board downstroke, stroke: 60 mm, 14 334 needles/m, 1 000 rpm
1 Dilo winder, ww: 7 m

 

Thermobonding lines

CODE: ZPHDUU6 – Thermobonding line, yoc: 1986, ww: 2.2 m (Click Here For Details) Photos available upon request

Consisting of:

2 Trützschler MWS bale openers, yoc: 1986, ww: 1 m
1 Temafa FFO fine opener, yoc: 1986
1 Spinnbau 2000 double doffer card, yoc: 1986, ww: 2.5 m, avantrain + 1 swift, randomizing cylinders
1 Ramisch Kleinewefers double cylinder thermobonding calender, yoc: 1986, ww: 2.5 m
1 Edelmann slitter and winder, yoc: 1986, ww: 2.2 m

CODE: 838JOOI – Thermobonding line, yoc: 1991-2009, ww: 2.7 m (Click Here For Details) Photos available upon request

Consisting of:

1 FOR double doffer card, yoc: 1991 – refurbished in 2016, ww: 3 m
1 Strahm thermobonding oven, yoc: 2009, ww: 2.8 m, single belt, 4 zones, cooling section
1 Comerio Ercole double cylinder thermobonding calender, yoc: 2006, ww: 2.5 m
1 Bastian slitting winder, yoc: 2008, ww: 3 m

CODE: 251YBXA – Thermobonding line, yoc: 2003, ww: 2.8 m (Click Here For Details) Photos available upon request

Consisting of:

1 Meccanica Carresi bale opener, ww: 2 m
1 FOR double doffer card, ww: 2.5 m, 1 swift, randomizing cylinders
1 Mecap cross-lapper, input: 2.5 m, output: 3 m, up to 60 m/min
1 Mecap thermobonding oven, ww: 2.9 m, single belt, 2 burners
1 Mecap longitudinal & cross cutting machine, ww: 2.8 m

CODE: CL33013 – Thermobonding and spray-bonding line, yoc: 1990, ww: 3.2 m (Click Here For Details) Photos

Consisting of:

3 bale openers
1 Rolando opener, ww: 1 m
1 Chiavazza opener, ww: 1 m
1 Bonino double doffer card, yoc: 1990, ww: 3.5 m, 2 swifts
1 Automatex cross-lapper, yoc: 1990, input: 3.5 m, output: 5 m
1 Mohr-Fleissner thermobonding oven, yoc: 1990, ww: 4 m, triple belt
1 Automatex cutting and winding unit, yoc: 1990, ww: 3.4 m
1 Masias edge trim opener
1 Magetron wadding compactor
Up to 350 kg/h

CODE: NEFS772 – Thermobonding line, yoc: 1987-1994, ww: 3.5 m (Click Here For Details) Photos available upon request

Consisting of:

1 Temafa bale opener, yoc: 1987, ww: 1.5 m
1 Hergeth fine opener, yoc: 1994, ww: 1.25 m
1 Hergeth double doffer card, yoc: 1987, ww: 3.5 m, avantrain + 1 swift, randomizing cylinders
1 Ramisch Kleinewefers double cylinder thermobonding calender, yoc: 1987, ww: 4.7 m
1 Edelmann slitter and winder, ww: 4.1 m

CODE: CL33025 – Thermobonding line, yoc: 1993, ww: 6.5 m (Click Here For Details) Photos

Consisting of:

5 Temafa bale openers, ww: 1.6 m
1 Temafa carding willow, ww: 1.6 m
2 Temafa Mixmaster blending boxes, length: 7 m, width: 3 m, height: 5.1 m, with 2 bin emptiers
1 Hergeth double doffer card, ww: 3.5 m, avantrain + 1 swift, randomizing cylinders
1 Autefa CL 2003 cross-lapper, input: 3.5 m, output: 7 m, up to 80 m/min
1 Hergeth drafter, ww: 7 m
1 Fleissner drum oven, ww: 7 m
1 accumulator, ww: 7 m
1 Autefa/Edelmann cutting and winding unit, ww: 7 m
1 Hagemann roll packaging line, ww. 7 m

 

Needling+thermobonding lines (needling lines with oven)

 

Airlay lines

CODE: AL32968 – Airlay needling line, yoc: 1982 – upgraded with Siemens PLC and frequency inverters in 2003, ww: 2.3 m (Click Here For Details) Photos

Consisting of:

1 Fehrer K12 airlay system, ww: 2.3 m
1 Asselin 169 pre-needle loom (drum tacker), ww: 2.8 m
1 Fehrer NL 21 finishing needle loom, ww: 2.4 m, 4 500 needles/m
Up to 500 kg/h

CODE: ZPFFS77 – Airlay thermobonding line, yoc: 2007, ww: 2.4 m (Click Here For Details) Photos

Consisting of:

1 Temafa Mixmaster blending box
1 Temafa fine opener, ww: 1.6 m
1 Fehrer V21/K12 airlay system, ww: 2.4 m
1 Fleissner thermobonding oven, ww: 2.4 m, double belt, 4 zones, 3 cooling sections
1 Technoplants accumulator, ww: 2.6 m
1 Technoplants cutting and winding unit, ww: 2.6 m

CODE: AL32971 – Airlay thermobonding line, yoc: 2008-2011, ww: 2.5 m (Click Here For Details) Photos

Consisting of:

3 Bonino bale openers, yoc: 2008, ww: 1.8 m
1 Bonino fine opener, yoc: 2008, ww: 2 m
1 Bonino Turbo Card airlay system, yoc: 2008, ww: 2.75 m
1 Sicam thermobonding oven, yoc: 2008, ww: 2.8 m, double belt, cooling section, length: 28 m
1 Technoplants accumulator, yoc: 2008, ww: 2.5 m
1 Technoplants cutting and winding unit, yoc: 2008, ww: 2.5 m
1 Technoplants wadding compactor and roll packaging machine, yoc: 2008, ww: 2.5 m
1 Masias fine opener, yoc: 2011, ww: 1.6 m
Up to 600 kg/h

CODE: AL32970 – Airlay needling line, yoc: 2016, ww: 2.6 m (Click Here For Details) Photos

Consisting of:

2 Bematic Bemablow fine openers, yoc: 2016, ww: 2.5 m
1 Bematic T-Max 350 airlay system, yoc: 2016, ww: 2.6 m
1 TecTex PR50 pre-needle loom, with batt feeding system, yoc: 2016, ww: 2.8 m, double board downstroke, stroke: 70 mm, 3 500 needles/m, 1 100 rpm, with unit to turn the material backwards into the loom for second needling and hence machine can work as a finishing needle loom

CODE: AL32973 – Airlay thermobonding line, yoc: 2016, ww: 2.6 m (Click Here For Details) Photos

Consisting of:

2 Bematic Bemablow fine openers, ww: 2.5 m
1 Bematic T-Max 350 airlay system, ww: 2.6 m
1 Bombi thermobonding oven, ww: 2.8 m, double belt, 3 burners, cooling section, calender

CODE: AL32974 – Airlay needling+thermobonding line, yoc: 2016, ww: 2.6 m (Click Here For Details) Photos

Consisting of:

2 Bematic Bemablow fine openers, ww: 2.5 m
1 Bematic T-Max 350 airlay system, ww: 2.6 m
1 TecTex PR50 pre-needle loom, with batt feeding system, ww: 2.8 m, double board downstroke, stroke: 70 mm, 3 500 needles/m, 1 100 rpm, with unit to turn the material backwards into the loom for second needling and hence machine can work as a finishing needle loom
1 Bombi thermobonding oven, ww: 2.8 m, double belt, 3 burners, cooling section, calender

CODE: MMIIZ81 – Airlay thermobonding line, yoc: 2007, ww: 3 m (Click Here For Details) Photos

Consisting of:

3 Laroche bale openers
2 Laroche fine openers
1 Laroche airlay system, ww: 3 m
1 Fleissner thermobonding oven, double belt, length: 15 m
1 Fleissner longitudinal & cross cutting machine
Optional: 1 Dilo OD II 30 finishing needle loom, ww: 3 m
Up to 1 500 kg/h

 

Stitch-bonding lines

CODE: FDAS772 – Stitch-bonding line, yoc: 1985, ww: 2.7 m (Click Here For Details) Photos available upon request

Consisting of:

1 Bonino single doffer card, ww: 2.5 m
1 Tecnica Tessile cross-lapper, input: 2.5 m, output: 3 m
1 Malimo Maliwatt stitch-bonding machine, ww: 2.7 m, gauge: 14

CODE: ZP28AAY – Stitch-bonding line, yoc: 1982, ww: 3.6 m (Click Here For Details) Photos available upon request

Consisting of:

1 Bonino single doffer card, ww: 3 m
1 Tecnica Tessile cross-lapper
1 Malimo Maliwatt stitch-bonding machine, ww: 3.6 m, gauge: 22

CODE: IRT8472 – Stitch-bonding line, yoc: 1986, ww: 3.6 m (Click Here For Details) Photos

Consisting of:

1 Bonino single doffer card
yoc: 1986
ww: 2.8 m

1 Tecnica Tessile cross-lapper
yoc 1986
input: 3 m, output: 4.2 m

1 Malimo Maliwatt 14013 stitch-bonding machine
yoc: 1986
ww: 3.6 m
Gauge: 22

CODE: NMM1221 – Stitch-bonding line, yoc: 1990, ww: 3.6 m (Click Here For Details) Photos available upon request

Consisting of:

1 Bonino single doffer card, ww: 3 m, avantrain + 1 swift
1 Tecnica Tessile cross-lapper, input: 3 m, output: 4.2 m
1 Karl Mayer Malimo Maliwatt stitch-bonding machine, ww: 3.6 m, gauge: 22
1 winder

CODE: JFB0481 – Stitch-bonding line, yoc: 1980, ww: 3.6 m (Click Here For Details) Photos

Consisting of:

1 Bonino single doffer card
ww: 2.5 m

1 Tecnica Tessile cross-lapper
input: 2.5 m, output: 4.2 m

1 Malimo Maliwat 14013 stitch-bonding machine
ww: 3.6 m
Gauge: 22

CODE: 71HSH99 – Stitch-bonding line, yoc: 1980-1985, ww: 4 m (Click Here For Details) Photos available upon request

Consisting of:

1 Bonino single doffer card, yoc: 1985, ww: 2.5 m
1 cross-lapper, yoc: 1985, input: 2.3 m, output: 4 m
1 Malimo Maliwatt stitch-bonding machine, yoc: 1980, ww: 4 m

 

Spunbond lines

CODE: SB32966 – Piovan/Enka/Varemac/Comerio Ercole double beam spunbond line, yoc: 2001, ww: 2.4 m Photos
Raw material: polypropylene
12 – 150 gr/m2
Up to 400 kg/h

 

Meltblown lines

CODE: ZP4233U – Entech/Comerio Ercole/ATF meltblown line, yoc: 2020, ww: 1.2 m Photos

CODE: CL33031 – Reicofil meltblown line, yoc: 2021, ww: 1.6 m Photos
Raw material: polypropylene

10 – 80 gr/m2

Up to 65 kg/h

CODE: HTEY728 – Oerlikon meltblown line, yoc: 2020, ww: 1.7 m Photos available upon request

CODE: CL33020 – Ramina Leonardo 1.0 P200 meltblown line, yoc: 2020, ww: 1.8 m Photos
Raw material: polypropylene
15 – 300 gr/m2
Up to 180 kg/h

CODE: ZP42XXX – Reicofil meltblown line, yoc: 2022, ww: 3.2 m Photos available upon request

 

Spunlace lines and machines

CODE: ZP53GFA – Spunlace line, yoc: 1998-2006, ww: 2.45 m (Click Here For Details) Photos available upon request

Consisting of:

1 Trützschler BDT bale plucker
1 Trützschler BOA bale opener
1 Trützschler MPM mixer
1 Trützschler TFV4 fine opener
2 Spinnbau ALW cards, ww: 2.5 m, avantrain + 1 swift, randomizing cylinders, Turbo-Unit aerodynamic take off
1 Fleissner Aquajet spunlace system, ww: 2.5 m
1 Fleissner drum oven, ww: 2.5 m
1 A.Celli turret winder, with 11 knives

30-250 gr/m2
1 000 kg/h

CODE: 2628UYT – Spunlace line, yoc: 2007, ww: 3.5 m (Click Here For Details) Photos available upon request

Consisting of:

2 HDB blending boxes
2 HDB fine openers
1 HDB double doffer card, ww: 4 m
1 HDB cross-lapper, input: 4 m, output: 5.5 m, up to 100 m/min
1 Rieter spunlace system, ww: 3.8 m
2 Fleissner thermobonding ovens, double belt, 6 zones each

35-500 gr/m2

CODE: ZP1145I – 1 Andritz spunlace system, yoc: 2000 – refurbished in 2023 (as new!), ww: 3.7 m Photos available upon request

We can also offer other used spunlace lines and new European made spunlace lines, contact us for details.

 

Staple fiber production lines

CODE: ZP4142B – Meccaniche Moderne polyester & polypropylene staple fiber production line, yoc: 1996 – refurbished in 2019, 3-25 den, capacity: 300 kg/h Photos

CODE: ZP4142A – Plasticisers polyester & polypropylene staple fiber production line, yoc: 1992 – refurbished in 2020, 4-30 den, capacity: 650 kg/h Photos

 

Coating, impregnation, lamination lines and machines

CODE: CO32968 – Welex hotmelt line, refurbished in 2017, ww: 1.5 m Photos

CODE: CO32969 – Battenfield hotmelt line, refurbished in 2017, ww: 1.5 m Photos

CODE: CO32970 – Bolton Emmerson hotmelt line, refurbished in 2010, ww: 1.5 m Photos

CODE: CO32971 – Bolton Emmerson hotmelt line, yoc: 1990, ww: 1.6 m Photos

CODE: 9RHFF02 – Machtex coating/lamination line, calender, yoc: 1994 – installed but never used, ww: 1.6 m Photos

CODE: CO32967 – Schaetti powder coating/lamination line, yoc: 1989, ww: 1.6 m Photos

CODE: GS7EYII – 1 Lima lamination machine, yoc: 1994, ww: 1.6 m Photos available upon request

CODE: ZP2MJKD – Mario Crosta double powder scatter coating/lamination line, yoc: 2015, ww: 1.6 m Photos

CODE: 8277KJU – 1 MP flame lamination machine, yoc: 1987, ww: 1.8 m Photos available upon request

CODE: CO32966 – 1 Pla-Ma flame lamination machine, yoc: 1982, ww: 1.8 m Photos

CODE: 6628JJT – 1 Stork lamination machine, yoc: 1989, ww: 1.8 m Photos

CODE: CO32964 – 1 Meyer lamination machine, yoc: 1992 – refurbished in 2021, ww: 1.8 m Photos

CODE: ZP9KIIE – Cavitec hotmelt line, yoc: 2000, ww: 1.8 m Photos

CODE: GS92KKA – Tepa impregnation line, yoc: 2004, ww: 1.8 m Photos

CODE: I32963 – Spooner impregnation line, yoc: 1995, ww: 1.8 m Photos

CODE: I32964 – Spooner impregnation line, yoc: 1990, ww: 1.8 m Photos

CODE: I32965 – Spooner impregnation line, yoc: 1990, ww: 1.8 m Photos

CODE: CO32972 – Spooner coating line, yoc: 1990, ww: 1.8 m Photos

CODE: CO32962 – Nordson PUR hotmelt line, yoc: 1998, ww: 1.9 m, porous coating Photos

CODE: CO32957 – Nordson hotmelt line, yoc: 2004, ww: 2.4 m, porous coating Photos

CODE: HHWY871 – Monti hotmelt line, yoc: 2007, ww: 2.5 m Photos

CODE: I32960 – Bombi impregnation line, yoc: 2004, ww: 2.5 m, consisting of: unwinder, accumulator, padder (foulard), drying cylinder, longitudinal & cross cutting machine, gas heated, speed: up to 25 m/min Photos

CODE: I32961 – 1 Brückner impregnation line, yoc: 1987, ww: 2.5 m (Click Here For Details) Photos

Consisting of:

1 unwinder
1 padder (foulard)
1 drying cylinder
1 impregnation unit
1 dryer, 5 zones
1 calender
1 accumulator
1 Dilo cutting and winding unit
1 Hansa foam mixer

CODE: 837JDHY – Brückner latex coating line, yoc: 1983, ww: 5.2 m Photos

 

Preparation:

Carding willows

CODE: OIEU113 – 1 Gaudino carding willow, ww: 850 mm Photos available upon request

CODE: 949DFN9 – 1 HDB carding willow, ww: 950 mm Photos

CODE: 9482JR0 – 1 Dilo carding willow, yoc: 1960, ww: 1 m Photos

CODE: ZPRES62 – 1 Rolando carding willow, ww: 1 m Photos available upon request

CODE: 7629YGD – 1 Temafa carding willow, yoc: 1990 – refurbished in 2023, ww: 1 m Photos available upon request

CODE: JBFB92X – 1 HDB carding willow, ww: 1 m Photos

CODE: CW32963 – 1 Becherini carding willow, yoc: 2000, ww: 1.1 m Photos

CODE: CW32964 – 1 Becherini carding willow, yoc: 1980s, ww: 1.1 m Photos

CODE: ZPKDH88 – 1 Temafa carding willow, yoc: 1987, ww: 1.2 m Photos available upon request

CODE: ZPGD721 – 1 Dell’Orco & Villani carding willow, ww: 1.2 m, refurbished in 2023 Photos available upon request

CODE: ZPJD882 – 1 Rolando carding willow, ww: 1.25 m Photos available upon request

CODE: CW32965 – 1 Rolando carding willow, yoc: 2000s, ww: 1.33 m Photos

CODE: MDJJ994 – 1 Cosmatex carding willow, yoc: 1986, ww: 1.4 m Photos

CODE: MDJJ992 – 1 Temafa carding willow, yoc: 1981, ww: 1.4 m Photos available upon request

CODE: ZPERE66 – 1 Gamba carding willow, yoc: 1990s, ww: 1.5 m Photos available upon request

CODE: CW32960 – 1 HDB carding willow, yoc: 1986, ww: 1.6 m, with HDB bale opener Photos

CODE: CW32961 – 1 HDB carding willow, yoc: 1986, ww: 1.6 m, with HDB bale opener Photos

CODE: OIEU661 – 1 Temafa carding willow, yoc: 2000, ww: 1.6 m, with Temafa bale opener, ww: 1.6 m Photos available upon request

CODE: GGEU77I – 1 Temafa carding willow, yoc: 1984, ww: 1.6 m, with Temafa bale opener, ww: 1.4 m Photos available upon request

CODE: 7292JHD – 1 Becherini carding willow, yoc: 1990, ww: 2 m Photos available upon request

 

Bale openers

CODE: YHSH995 – 1 Trützschler GBRA bale opener, yoc: 1984 Photos available upon request

CODE: ZP92A11 – 1 Hergeth bale opener, yoc: 1980, ww: 1 m Photos available upon request

CODE: 7269HAW – 1 Trützschler AS bale opener, yoc: 1978, ww: 800 mm Photos available upon request

CODE: GFDT88X – 1 Rando bale opener, ww: 800 mm Photos available upon request

CODE: 9882A13 – 1 Trützschler CS 1000 bale opener, yoc: 1996, ww: 1 m, with Trützschler VFO 1200 fine opener, ww: 1.2 m Photos available upon request

CODE: HHDH882 – 1 Trützschler BO 1200 bale opener, yoc: 1995, ww: 1.2 m Photos

CODE: BO32971 – 1 Bonino bale opener, yoc: 2004, ww: 1.3 m Photos

CODE: II88710 – 1 Temafa bale opener, yoc: 1987, ww: 1.4 m Photos available upon request

CODE: GGEU77I – 1 Temafa bale opener, yoc: 1984, ww: 1.4 m, with Temafa carding willow, ww: 1.6 m Photos available upon request

CODE: YDTD881 – 1 Temafa bale opener, yoc: 2005, ww: 1.5 m Photos available upon request

CODE: 633AYTA – 1 Temafa bale opener, yoc: 1995, ww: 1.5 m Photos available upon request

CODE: 9DJA92C – 1 Ommi bale opener, yoc: 1990, ww: 1.5 m Photos available upon request

CODE: 6202GHS – 2 Temafa bale openers, each machine is available separately, yoc: 1990, ww: 1.5 m Photos

CODE: KFN0211 – 1 HDB bale opener, yoc: 1980, ww: 1.5 m Photos

CODE: ZP084HH – 1 Trützschler bale opener, fully refurbished and modernized in 2021 (as new!), ww: 1.5 m Photos

CODE: JGSF881 – 1 Masias bale opener, yoc: 2011, ww: 1.6 m Photos available upon request

CODE: 3820HYW – 1 Tecnomeccanica Biellese bale opener, yoc: 2001, ww: 1.6 m Photos available upon request

CODE: BO32979 – 2 Wise bale openers, yoc: 1989, ww: 1.6 m Photos

CODE: OIEU661 – 1 Temafa bale opener, yoc: 2000, ww: 1.6 m, with Temafa carding willow, ww: 1.6 m Photos available upon request

CODE: HDHG882 – 1 Gardenas bale opener, ww: 1.6 m Photos available upon request

CODE: HDHG883 – 1 Gardenas bale opener, ww: 1.6 m Photos available upon request

CODE: ZP69OOI – 2 Rolando bale openers, each machine is available separately, yoc: 1980, ww: 1.6 m Photos available upon request

CODE: BO32960 – 1 Temafa bale opener, yoc: 1977, ww 1.6 m Photos

CODE: HD383JJ – 1 Temafa bale opener, yoc: 1999, ww: 2.5 m Photos available upon request

CODE: 829A72A – 2 Rolando bale openers, each machine is available separately, yoc: 1989 and 1994, ww: 2.5 m Photos available upon request

CODE: ZP98UU8 – 1 Ommi bale opener, yoc: 1996, ww: 2.6 m Photos available upon request

CODE: BO32981 – 1 Rolando bale opener, yoc: 2000, ww: 2.84 m Photos

CODE: EWED771 – 1 Rolando bale opener, ww: 2.9 m Photos available upon request

CODE: BO32980 – 1 Meccanica Carresi bale opener, yoc; 1980, ww: 3 m Photos

CODE: JF949K1 – 1 HDB bale opener, yoc: 1990, ww: 3 m Photos

CODE: HBS92HL – 1 Rolando bale opener, yoc: 1988, ww: 3 m Photos

CODE: 5392YYT – 1 Masias bale opener, yoc: 1996, ww: 3 m Photos available upon request

CODE: 7237HHM – 1 Tecnomeccanica Biellese bale opener, yoc: 2000 – refurbished in 2016, ww: 3 m Photos available upon request

CODE: ZP21498 – 1 Ommi bale opener, yoc: 1990, ww: 4 m Photos available upon request

CODE: 9837JHA – 1 Tecnomeccanica Biellese bale opener, yoc: 2000, ww: 4 m Photos available upon request

 

Fine openers and openers

CODE: VXFA551 – 1 Jorba picker Photos available upon request

CODE: 7271GSW – 1 Rieter Uniflex fine opener, yoc: 1998 Photos available upon request

CODE: ZP72GAO – 1 Hergeth fine opener, yoc: 1977 Photos available upon request

CODE: ZP62SUU – 1 Hergeth MTO fine fine opener, 1990s Photos available upon request

CODE: 6728YTR – 1 Rieter Uniflex fine opener, yoc: 1998 Photos available upon request

CODE: 7273HHA – 1 Trützschler RV fine opener, yoc: 1985, with Trützschler LVS condenser Photos

CODE: ZPUE311 – 1 Hergeth Hollingsworth MTO/S fine opener, yoc: 1990 Photos

CODE: 3162HSA – 1 Hergeth picker, yoc: 1985, ww: 350 mm Photos available upon request

CODE: FO32962 – 1 Rando ROB opener/blender, yoc: 2003, ww: 900 mm Photos

CODE: JDJ821L – 1 Hollingsworth fine opener, ww: 1 m Photos available upon request

CODE: GDFW88I – 1 Rieter fine opener, ww: 1 m Photos available upon request

CODE: 273SUUY – 1 Marzoli fine opener, yoc: 1988, ww: 1 m Photos available upon request

CODE: 72JDJ87 – 1 Marzoli fine opener, yoc: 2002, ww: 1.2 m Photos available upon request

CODE: GG72558 – 1 Trützschler RK fine opener, yoc: 1985 – refurbished in 2023, ww: 1.2 m Photos

CODE: HGS7266 – 1 Trützschler FDU 1200 fine opener, yoc: 2000, ww: 1.2 m, with Trützschler BR-CO condenser Photos available upon request

CODE: KR49MD2 – 1 Rolando mixing picker with condenser, ww: 1.2 m Photos

CODE: FO32968 – 1 Trützschler FD-S fine opener, yoc: 2004, ww: 1.2 m Photos

CODE: II88711 – 2 Hergeth fine openers, each machine is available separately, yoc: 1994 and 1995, ww: 1.25 m Photos available upon request

CODE: FFDTOJD – 1 Erko fine opener, yoc: 2008, ww: 1.3 m Photos available upon request

CODE: FO32969 – 1 Rolando beater, yoc: 1980s, ww: 1.4 m Photos

CODE: ZP38HHP – 1 Temafa fine opener, yoc: 1990, ww: 1.4 m Photos

CODE: U271778 – 1 Delmas shaker, ww. 1.4 m Photos available upon request

CODE: GSFA771 – 1 HDB shaker, ww: 1.4 m Photos available upon request

CODE: TDCA661 – 1 Temafa shaker, control panel from 2007, ww: 1.5 m Photos available upon request

CODE: FFDTOID – 1 Temafa fine opener, ww: 1.5 m Photos available upon request

CODE: TE32987 – 1 Masias fine opener, yoc: 2011, ww: 1.6 m Photos

CODE: KJIE924 – 1 Cormatex SF/2C fine opener, yoc: 1996, ww: 1.7 m Photos available upon request

CODE: ZP6G778 – 1 Bonino picker, yoc: 1994, ww: 2 m Photos available upon request

CODE: GDFW881 – 1 Masias beater, ww: 2 m Photos available upon request

CODE: 82881OO – 1 Masias fine opener, yoc: 2002, ww: 2.2 m Photos available upon request

CODE: ZPEWR81 – 1 Rolando beater, ww: 2.4 m Photos available upon request

CODE: MIR6211 – 1 Dell’orco & Villani beater, yoc: 2000, ww: 2.5 m Photos available upon request

CODE: 1528IUE – 1 Dell’orco & Villani beater, yoc: 1992, ww: 2.5 m Photos available upon request

CODE: HDGD71X – 1 Dell’orco & Villani beater, ww: 2.5 m Photos available upon request

CODE: 6162HSV – 1 Dell’Orco & Villani beater, ww: 2.5 m Photos available upon request

CODE: HGDT88O – 1 Dell’Orco & Villani beater, yoc: 1987, ww: 2.5 m Photos available upon request

CODE: DGDG661 – 2 Dell’Orco & Villani beaters, each machine is available separately, yoc: 1990 and 2000, ww: 2.5 m Photos available upon request

CODE: ZP539II – 1 Dell’orco & Villani beater, refurbished in 2008, ww: 2.5 m Photos available upon request

CODE: FO32961 – 2 Bematic Bemablow fine openers, each machine is available separately, yoc: 2016, ww: 2.5 m Photos

 

Blending boxes

CODE: BB32969 – 1 Temafa blending box, yoc: 1995, length: 6 m, width: 3.1 m, height: 6 m, with 1 bin emptier Photos

CODE: ZP21499 – 1 Tecnomeccanica Biellese blending box, yoc: 1997, length: 6.5 m, width: 3 m, height: 5.5 m, with 1 bin emptier Photos available upon request

CODE: ZPAAG99 – 2 Crosa blending boxes, each machine is available separately, yoc: 1970s, length: 6.5 m, width: 3.3 m, height: 5 m, with 1 bin emptier Photos available upon request

CODE: BB32963 – 2 Meccanica Carresi blending boxes, yoc: 1988, length: 7 m, width: 2.2 m, height: 4.5 m, with 1 bin emptier Photos

CODE: BB32964 – 2 Meccanica Carresi blending boxes, yoc: 1988, length: 7 m, width: 2.2 m, height: 4.5 m, with 1 bin emptier Photos

CODE: BB32971 – 2 Temafa Mixmaster blending boxes, yoc: 1993, length: 7 m, width: 3 m, height: 5.1 m, with 2 bin emptiers Photos

CODE: BB32962 – 2 Meccanica Carresi blending boxes, yoc: 1994, length: 7.6 m, width: 3.5 m, height: 4.5 m, with 1 bin emptier Photos

CODE: ZP1324A – 3 Temafa blending boxes, each machine is available separately, yoc: 1990s, length: 8 m, width: 3.4 m, height: 8 m Photos available upon request

CODE: PEJR323 – 3 Bocchio blending boxes, yoc: 1994, length: 8 m, width: 4.5 m, height: 2.97 m, with 1 bin emptier Photos available upon request

CODE: GCDS751 – 2 Tecnomeccanica Biellese blending boxes, yoc: 1995, length: 10 m, width: 3.5 m, height: 6 m, with 1 bin emptier Photos

CODE: BB32973 – 1 SIV blending box, yoc: 2000, length: 10 m, width: 8 m, height: 5 m, with 1 bin emptier Photos

CODE: BB32972 – 1 Temafa Mixmaster blending box, yoc: 2000s, length: 10 m, width: 4 m, height: 4 m, with 1 bin emptier Photos

CODE: 98E3IIU – 1 Temafa Mixmaster blending box, yoc: 1985, length: 11 m, width: 4 m, height: 4.5 m Photos available upon request

CODE: 713GSBA – 2 Mat-Tex blending boxes, yoc: 1988, length: 11 m, width: 4 m, height: 5.5 m, with 1 bin emptier Photos available upon request

CODE: 7298HHA – 1 Temafa blending box, yoc: 1988, length: 12 m, width: 3.1 m, height: 6 m, with 1 bin emptier Photos available upon request

CODE: BB32970 – 2 HDB blending boxes, each machine is available separately, yoc: 1986, length: 12 m, width: 4 m, height: 6 m, each with 1 bin emptier Photos

CODE: 3929HHE – 1 Temafa Mixmaster blending box, yoc: 1999, length: 13 m, width: 3 m, height: 2.5 m Photos available upon request

CODE: JDIE881 – 1 Bocchio blending box, yoc: 1984, length: 16.4 m, width: 3.5 m, height: 4 m, with 1 bin emptier Photos available upon request

CODE: MDJJ996 – 2 Meccanica Carresi blending boxes, each machine is available separately, yoc: 1979-1986, length: 20.7 m, width: 3.6 m, height: 4.8 m, with 1 bin emptier Photos available upon request

CODE: NS03JS1 – 2 OMT blending boxes, each machine is available separately, yoc: 1995, length: 22 m, width: 4 m, height: 4.35 m, each with 1 bin emptier Photos available upon request

CODE: X8R5HV7 – 2 Temafa blending boxes, each machine is available separately, yoc: 1989, length: 24 m, width: 4 m, height: 5 m Photos

 

Mixers

CODE: MI32960 – 1 Trützschler MPM 4 mixer, yoc: 1989 – refurbished in 2022, 4 chambers Photos available upon request

CODE: HGA892Z – 1 Trützschler MPM 4 mixer, yoc: 1991, 4 chambers Photos available upon request

CODE: ZPHAG83 – 1 Trützschler mixer, fully refurbished and modernized in 2018 (almost as new!), 10 chambers Photos

CODE: MI32957 – 1 Hergeth Hollingsworth SML 6 mixer, yoc: 1995, ww: 1.6 m, 6 chambers Photos available upon request

CODE: MI32959 – 1 Trützschler MM6/1600 mixer, yoc: 1995, ww: 1.6 m, 6 chambers Photos available upon request

CODE: 8HDA882 – 1 Trützschler MPM 8 mixer, yoc: 1994, ww: 1.6 m, 8 chambers, with Trützschler TVF 1 fine opener Photos available upon request

CODE: GG83HHD – 1 Trützschler MCM/8 mixer, yoc: 1997, ww: 1.6 m, 8 chambers, with Trützschler TFV Tuftomat fine opener Photos available upon request

 

Opening lines

CODE: OL32962 – 1 Trützschler opening line, yoc: 1983, ww: 1 m, consisting of: 4 Trützschler MWS bale openers, 1 Trützschler mixing opener Photos

CODE: OL32959 – 1 Trützschler opening line, yoc: 1997, ww: 1.2 m, consisting of: 4 Trützschler BOW 1200 bale openers, ww: 1.2 m, 1 Trützschler FM mixing opener Photos

CODE: OL32960 – 1 opening line, yoc: 1989-2019, ww: 1.25 m, consisting of: 5 Hergeth bale openers, yoc; 1989, ww: 1.25 m, 1 Graute blending opener, yoc: 2019, ww: 1 m Photos

CODE: ZPGFA66 – 1 Bonino opening line, yoc: 2014, ww: 1.5 m, consisting of: 3 bale openers, ww: 1.5 m, 1 blending opener, ww: 1.25 m Photos

CODE: OL32961 – 1 Temafa opening line, yoc: 1993, ww: 1.6 m, consisting of: 5 bale openers, 1 carding willow Photos

CODE: OL32957 – 1 opening line, yoc: 1985-1986, ww: 2.5 m (Click Here For Details) Photos

Consisting of:

1 Rolando bale opener, yoc: 1985, ww: 2.5 m
1 Rolando shaker, yoc: 1985, ww: 2.5 m
1 Rolando carding willow, yoc: 1985, ww: 1.6 m
4 Ommi blending boxes, yoc: 1986, length: 16 m, width: 3 m, height: 4.5 m, with 2 bin emptiers

 

Cards with cross-lappers:

Single doffer cards with cross-lappers

CODE: ZPUD88E – 1 Hergeth Hollingsworth single doffer card, yoc: 1988, ww: 2.5 m
+ 1 Autefa CL 2000 cross-lapper, yoc: 1999, input: 2.5 m, output: 2.5 m Photos available upon request

CODE: ZPRD887 – 1 HDB single doffer card, yoc: 1985, ww: 2.5 m, avantrain + 1 swift, up to 250 kg/h
+ 1 MTV cross-lapper, yoc: 2002, input: 2.8 m, output: 2.7 m, up to 60 m/min Photos available upon request

CODE: ZP826GD – 1 Bonino single doffer card, yoc: 1985, ww: 2.5 m
+ 1 Tecnica Tessile cross-lapper, yoc: 1985, input: 2.5 m, output: 3.2 m Photos available upon request

CODE: GSFA922 – 1 HDB single doffer card, yoc: 1974, ww: 2.5 m, pre-avantrain, avantrain, 1 swift
+ 1 cross-lapper, input: 2.5 m, output: 3.5 m Photos available upon request

CODE: 727AUYR – 1 FOR single doffer card, yoc: 1995, ww: 2.5 m, avantrain + 2 swifts
+ 1 Cormatex cross-lapper, yoc: 1995, input: 2.5 m, output: 4 m Photos available upon request

CODE: ZPB048X – 1 Bonino single doffer card, yoc: 1980, ww: 2.5 m
+ 1 Tecnica Tessile cross-lapper, input: 2.5 m, output: 4.2 m Photos available upon request

CODE: ZPT847X – 1 Bonino single doffer card, yoc: 1986, ww: 2.8 m
+ 1 Tecnica Tessile cross-lapper, yoc: 1986, input: 3 m, output: 4.2 m Photos available upon request

CODE: ZP61LIU – 1 Bonino single doffer card, yoc: 2014, ww: 2.5 m, avantrain + 2 swifts, condensing cylinder
+ 1 Technoplants cross-lapper, yoc: 2014, input: 2.5 m, output: 5.5 m, up to 50 m/min Photos available upon request

 

Double doffer cards with cross-lappers

CODE: 82SAIUE – 1 FOR double doffer card, yoc: 1991, ww: 2.5 m
+ 1 Asselin cross-lapper, input: 3 m, output: 2.5 m Photos available upon request

CODE: 8283HAW – 1 Reisky & Schlese double doffer card, yoc: 2004, ww: 2.5 m, 2 swifts
+ 1 Reisky & Schlese cross-lapper, output: 3 m Photos available upon request

CODE: ZPZP212 – 1 Bonino double doffer card, yoc: 1990, ww: 2.5 m, 1 swift, condensing cylinder
+ 1 Tecnica Tessile cross-lapper, yoc: 1990, input: 2.5 m, output: 3.3 m, up to 45 m/min Photos

CODE: CC32966 – 1 Spinnbau double doffer card, yoc: 1986, ww: 2.5 m, avantrain + 1 swift, randomizing cylinders, up to 400 kg/h
+ 1 Autefa cross-lapper, yoc: 1986, input: 2.5 m, output: 3.5 m Photos

CODE: SH128PP – 1 FOR double doffer card, yoc: 1988, ww: 3 m, 2 swifts, up to 400 kg/h
+ 1 FOR cross-lapper, yoc: 1988, input: 3 m, output: 3.8 m Photos

CODE: CC32975 – 1 Hergeth double doffer card, yoc: 1993, ww: 3.5 m, avantrain + 1 swift, randomizing cylinders
+ 1 Autefa CL 2003 cross-lapper, yoc: 1993, input: 3.5 m, output: 7 m, up to 80 m/min Photos

 

Airlay systems

CODE: 881099U – 1 Fehrer V21/R-K12 airlay system, yoc: 1995, ww: 1.8 m Photos available upon request

CODE: AL32969 – 1 Fehrer K12 airlay system, yoc: 1982, ww: 2.3 m Photos

CODE: PKJD821 – 1 Fehrer V21/K12 airlay system, yoc: 1995, ww: 2.4 m Photos available upon request

CODE: AL32961 – 1 Bematic T-Max 350 airlay system, yoc: 2016, ww: 2.6 m, with 2 Bematic Bemablow fine openers, yoc: 2016, ww: 2.5 m Photos

CODE: AL32972 – 1 Bonino Turbo Card airlay system, yoc: 2008, ww: 2.75 m, with 3 Bonino bale openers, yoc: 2008, ww: 1.8 m, 1 Bonino fine opener, yoc: 2008, ww: 2 m Photos

 

Cards:

Single doffer cards

CODE: ZP710YT – 1 Spinnbau single doffer card, yoc: 1989, ww: 1.8 m, avantrain + 1 swift Photos available upon request

CODE: ZP25RYY – 1 FOR single doffer card, yoc: 1991 – refurbished in 2021, ww: 2 m, avantrain + 2 swifts Photos

CODE: 0982HSX – 1 HDB single doffer card, ww: 2.2 m, avantrain + 1 swift Photos available upon request

CODE: CA32989 – 1 Bonino single doffer card, yoc: 1990s, ww: 2.2 m, 2 swifts Photos

CODE: CA32990 – 1 Spinnbau single doffer card, yoc: 1980s, ww: 2.2 m, avantrain + 1 swift Photos

CODE: YEYS882 – 1 HDB single doffer card, yoc: 1985, ww: 2.5 m, avantrain + 1 swift, up to 250 kg/h Photos available upon request

CODE: ZP721YT – 2 HDB single doffer cards, each machine is available separately, yoc: 1978, ww: 2.5 m, 2 swifts Photos available upon request

CODE: ZP721RR – 2 OCTIR single doffer cards, each machine is available separately, yoc: 1982, ww: 2.5 m, 2 swifts Photos available upon request

CODE: 6821JSA – 1 Thibeau single doffer card, yoc: 1991, ww: 2.5 m, avantrain + 1 swift Photos

CODE: 8UWQ771 – 1 OCTIR single doffer card, yoc: 1974, ww: 2.5 m, avantrain + 2 swifts Photos

CODE: 76HD865 – 1 Spinnbau single doffer card, yoc: 1991, ww: 2.5 m Photos available upon request

CODE: 5217IIY – 1 FOR single doffer card, yoc: 1985 – electric motors and control panel from 2021, ww: 2.5 m, avantrain + 2 swifts Photos available upon request

CODE: 9842HSG– 1 FOR single doffer card, yoc: 1985 – refurbished in 2002, ww: 2.5 m, 2 swifts Photos available upon request

CODE: 092AYTW – 1 Sacfem single doffer card, ww: 2.5 m, avantrain + 1 swift Photos available upon request

CODE: 8281OOI – 1 OCTIR single doffer card, ww: 2.5 m, avantrain + 1 swift Photos available upon request

CODE: 9683JAS – 1 Thibeau single doffer card, yoc: 1991, ww: 2.5 m, 1 swift Photos

CODE: ATMJ881 – 1 Hergeth Hollingsworth single doffer card, yoc: 1988, ww: 2.5 m Photos available upon request

 

Double doffer cards

CODE: CA32979 – 1 Bematic double doffer card, yoc: 1986, ww: 2.2 m, avantrain + 1 swift, up to 600 kg/h, with Hergeth mixer, yoc: 1990 and Dell’Orco & Villani beater, yoc: 1990 Photos

CODE: CA32965 – 1 Spinnbau double doffer card, yoc: 1982, ww: 2.2 m, avantrain + 1 swift, randomizing cylinders Photos

CODE: FJDA661 – 1 Spinnbau double doffer card, yoc: 1994 – electronics from 2009, ww: 2.5 m, avantrain + 1 swift, randomizing cylinders Photos available upon request

CODE: ZP137IU – 1 Bonino double doffer card, yoc: 1990, ww: 2.5 m, 1 swift, condensing cylinder Photos

CODE: 929DBXA – 1 Spinnbau double doffer card, yoc: 1989, ww: 2.5 m, avantrain + 1 swift, condensing cylinders Photos available upon request

CODE: ZP4273I – 1 Thibeau double doffer card, yoc: 1994, ww: 2.5 m, avantrain + 2 swifts Photos

CODE: CA32974 – 1 Spinnbau double doffer card, yoc: 1986, ww: 2.5 m, avantrain + 1 swift, randomizing cylinders, up to 400 kg/h Photos

CODE: 273GYYT – 1 HDB double doffer card, fully refurbished and modernized in 2022 (as new!), ww: 2.5 m, 2 swifts Photos

CODE: 92JSIOA – 1 FOR Webmaster double doffer card, yoc: 2016, ww: 3 m, avantrain + 2 swifts Photos available upon request

CODE: HGFR772 – 1 FOR Injection double doffer card, yoc: 1998, ww: 3.5 m, 2 swifts, up to 950 kg/h Photos

CODE: 6263AAS – 1 Hergeth double doffer card, yoc: 1987, ww: 3.5 m, avantrain + 1 swift, randomizing cylinders, up to 700 kg/h Photos available upon request

CODE: CA32988 – 2 Hergeth double doffer cards, each machine is available separately, yoc: 1993, ww: 3.5 m, avantrain + 1 swift, randomizing cylinders Photos

CODE: ZP32600 – 1 Thibeau double doffer card, yoc: 2002 – electronics from 2022, ww: 3.75 m, avantrain + 1 swift, randomizing cylinders, up to 900 kg/h Photos available upon request

 

Cross-lappers

CODE: CR32980 – 1 Autefa cross-lapper, refurbished by Cormatex in 2000, input: 2.5 m, output: 2.5 m, up to 50 m/min Photos

CODE: 918AIIU – 1 Autefa CL 2000 cross-lapper, yoc: 1999, input: 2.5 m, output: 2.5 m Photos

CODE: CR32993 – 1 Autefa cross-lapper, yoc: 1989 – controls from 2016, input: 2.5 m, output: 2.5 m Photos

CODE: 92JX991 – 1 MTV cross-lapper, yoc: 2002, input: 2.5 m, output: 2.7 m Photos

CODE: ZP73500 – 1 Asselin Profile 400 cross-lapper, yoc: 1999, input: 2.5 m, output: 2.8 m, up to 120 m/min Photos

CODE: ZP726HY – 1 Asselin T350 cross-lapper, yoc: 1988, input: 2.7 m, output: 3.1 m, up to 60 m/min Photos

CODE: ZPUE3ZY – 1 Cormatex cross-lapper, yoc: 1986, input: 2.6 m, output: 3.2 m, up to 48 m/min Photos available upon request

CODE: ZP63HAO – 1 Tecnica Tessile cross-lapper, yoc: 1990, input: 2.5 m, output: 3.3 m, up to 45 m/min Photos

CODE: SADSV99 – 1 Autefa CL 2003 cross-lapper, yoc: 1996, input: 2.5 m, output: 3.5 m Photos

CODE: CR32976 – 1 Autefa cross-lapper, yoc: 1986, input: 2.5 m, output: 3.5 m Photos

CODE: DKFJ011 – 1 Asselin Profile 035 cross-lapper, yoc: 1996, input: 3.5 m, output: 3.7 m, up to 90 m/min Photos

CODE: ZPDSW11 – 1 Tecnica Tessile cross-lapper, yoc: 1985, input: 2.5 m, output: 4 m Photos available upon request

CODE: POIE99A – 1 Asselin cross-lapper, yoc: 1996, input: 3.5 m, output: 4 m Photos

CODE: ZPOO12A – 1 Automatex FA5000/TC cross-lapper, yoc: 1999, input: 3 m, output: 4.4 m, up to 100 m/min Photos

CODE: ZP982GS – 1 Cormatex cross-lapper, with new motors and control panel, input: 2.5 m, output: 4.5 m Photos available upon request

CODE: 6729JJJ – 1 Guasch cross-lapper, yoc: 2000, input: 2.5 m, output: 5 m Photos available upon request

CODE: ZP019IX – 1 Autefa CL 2003 cross-lapper, yoc: 1995, input: 3 m, output: 5 m, up to 100 m/min Photos

CODE: GDGF66R – 1 FOR cross-lapper, yoc: 1995, input: 2.5 m, output: 5.2 m, up to 40 m/min Photos

CODE: ZP82GAR – 1 Technoplants cross-lapper, yoc: 2000 – refurbished in 2023, input: 2.5 m, output: 5.5 m Photos available upon request

CODE: ZP1020F – 1 Autefa cross-lapper, yoc: 2002 – electronics from 2023, input: 2.8 m, output: 5.5 m, up to 60 m/min Photos available upon request

CODE: ZP05GGX – 1 TecTex FA5000 cross-lapper, yoc: 2016 – never installed, input: 3 m, output: 7 m, up to 100 m/min Photos available upon request

CODE: CR32991 – 2 Autefa CL 2003 cross-lappers, each machine is available separately, yoc: 1993, input: 3.5 m, output: 7 m, up to 80 m/min Photos

CODE: CR32981 – 1 Automatex FA3000/TC cross-lapper, yoc: 1998 – installed but never used, input: 3.2 m, output: 7.2 m, up to 100 m/min, machine is without the belts Photos

 

Drafters

CODE: 736JIIU – 1 FOR drafter, yoc: 1996, ww: 3.5 m Photos available upon request

CODE: ZP992J1 – 1 Dilo VE 4-35 drafter, yoc: 1998, ww: 3.5 m, 5 rollers Photos

CODE: ZP15YT9 – 1 Trützschler drafter, yoc: 2011 – never used, ww: 3.6 m Photos available upon request

CODE: DR32959 – 1 Hergeth drafter, yoc: 1993, ww: 7 m Photos

 

Needle looms:

Pre-needle looms

CODE: NL33032 – 1 Dilo pre-needle loom, ww: 2.2 m, yoc: 1980s – refurbished in 2017, double board downstroke, stroke: 60 mm, 1 768 needles/m, 1 000 rpm, with longitudinal cutting and winding unit Photos

CODE: 7371JJE – 1 Fehrer pre-needle loom, yoc: 1995, ww: 2.3 m, single board upstroke, stroke: 40 mm, 4 000 needles/m, 1 000 rpm Photos available upon request

CODE: G27KK66 – 1 Fehrer pre-needle loom, yoc: 1984, ww: 2.3 m, single board upstroke Photos

CODE: ZPJA032 – 1 Fehrer NL 28 pre-needle loom, yoc: 1974, ww: 2.3 m, 1 500 needles/m Photos

CODE: NL33031 – 1 Fehrer NL 9 pre-needle loom, yoc: 1974 – refurbished in 1999, ww: 2.4 m, single board downstroke, stroke: 60 mm, 1 825 needles/m, 1 100 rpm Photos

CODE: NL33048 – 1 Tecnica Tessile pre-needle loom, yoc: 1980s, ww: 2.4 m, single board downstroke, 400 needles/m, 500 rpm Photos

CODE: NL33028 – 1 Automatex pre-needle loom, yoc: 1986, ww: 2.4 m, double board downstroke, 4 000 needles/m Photos

CODE: NL33008 – 1 Dilo NFZ 25 pre-needle loom, yoc: 1970s, ww: 2.5 m, single board downstroke, stroke: 100 mm, 2 580 needles/m, 800 rpm Photos

CODE: ZPUE3XX – 1 Fehrer NL 6/S pre-needle loom, with batt feeding system, yoc: 1986, ww: 2.5 m, single board upstroke, 1 500 needles/m, 800 rpm Photos available upon request

CODE: GR41388 – 1 2N (TecTex) pre-needle loom, yoc: 1990, ww: 2.5 m, single board downstroke, stroke: 60 mm, 860 needles/m Photos

CODE: ZP527HH – 1 Asselin pre-needle loom, yoc: 1980s, ww: 2.6 m, single board downstroke, stroke: 60 mm, 4 430 needles/m Photos

CODE: 4279HDA – 1 Fehrer NL 9/RS pre-needle loom, yoc: 1983, ww: 2.6 m Photos available upon request

CODE: MSIU221 – 1 Guasch pre-needle loom, yoc: 1992 – refurbished in 2020, ww: 2.6 m, single board downstroke, stroke: 60 mm, 3 000 needles/m, 550 rpm Photos available upon request

CODE: 4279HDB – 1 Fehrer NL 6/S pre-needle loom, yoc: 1983, ww: 2.6 m Photos available upon request

CODE: NL33044 – 1 Fehrer NL 28 pre-needle loom, yoc: 1976, ww: 2.64 m, single board downstroke, stroke: 60 mm, 1 000 needles/m, 800 rpm Photos

CODE: NL33045 – 1 Fehrer NL 28 pre-needle loom, yoc: 1976, ww: 2.64 m, single board downstroke, stroke: 60 mm, 1 000 needles/m, 800 rpm
+ 1 Fehrer NL 9 pre-needle loom, yoc: 1976, ww: 2.7 m, single board downstroke, stroke: 60 mm, 3 250 needles/m, 800 rpm
+ 1 Fehrer NL 12 finishing needle loom, yoc: 1976, ww: 2.64 m, double board downstroke, stroke: 60 mm, 6 000 needles/m, 1 200 rpm Photos

CODE: MSIU222 – 1 Automatex pre-needle loom, yoc. 2008 – refurbished in 2021, ww: 2.7 m, single board downstroke, stroke: 60 mm, 5 000 needles/m, 1 100 rpm Photos available upon request

CODE: ZP3153I – 1 Automatex PR50/T pre-needle loom, yoc: 1990s, ww: 2.7 m, single board downstroke, stroke: 60 mm, 5 000 needles/m, 1 000 rpm Photos available upon request

CODE: NL33042 – 1 Fehrer NL 9 pre-needle loom, yoc: 1976, ww: 2.7 m, single board downstroke, stroke: 60 mm, 3 250 needles/m, 800 rpm Photos

CODE: NL33039 – 1 Asselin 169 pre-needle loom (drum tacker), yoc: 1982, ww: 2.8 m Photos

CODE: 729SJDX – 1 Asselin pre-needle loom (drum tacker), ww: 2.8 m Photos available upon request

CODE: ZP8371O – 1 Asselin 169 pre-needle loom (drum tacker), yoc: 1987, ww: 2.8 m Photos

CODE: NL33026 – 1 TecTex PR50 pre-needle loom, with batt feeding system, yoc: 2016, ww: 2.8 m, double board downstroke, stroke: 70 mm, 3 500 needles/m, 1 100 rpm, with unit to turn the material backwards into the loom for second needling and hence machine can work as a finishing needle loom Photos

CODE: MSAX63B – 1 2N (TecTex) NS-3000/33 pre-needle loom, with batt feeding system, yoc: 1995, ww: 2.9 m, stroke: 60 mm, 3 300 needles/m Photos

CODE: NL33009 – 1 Dilo NFZ 30 DO pre-needle loom, yoc: 1970s, ww: 3 m, single board downstroke, stroke: 60 mm, 5 160 needles/m, 1 000 rpm Photos

CODE: 4241876 – 1 Asselin 169 pre-needle loom (drum tacker), ww: 3 m Photos available upon request

CODE: NL33052 – 1 Asselin 169 pre-needle loom (drum tacker), with batt feeding system, yoc: 1985, ww: 3 m Photos

CODE: TSGD88X – 1 Fehrer NL 9/S pre-needle loom, yoc: 1987, ww: 3.3 m, stroke: 60 mm, 4 750 needles/m Photos available upon request

CODE: 6362HH2 – 1 Asselin 169 pre-needle loom (drum tacker), yoc: 1982, ww: 3.4 m Photos available upon request

CODE: 6263GHS – 1 Automatex PR30/T pre-needle loom, yoc: 1985, ww: 3.4 m, single board downstroke, 3 000 needles/m, 1 000 rpm Photos available upon request

CODE: NL33012 – 1 Dilo OD I 35 pre-needle loom, with CBF, yoc: 1986, ww: 3.5 m, single board downstroke, stroke: 60 mm, 4 000 needles/m, 1 200 rpm Photos

CODE: HI92OOO – 1 Fehrer NL 9 pre-needle loom, yoc: 1997, ww: 3.6 m, single board downstroke, stroke: 60 mm, 5 000 needles/m, 1 200 rpm Photos available upon request

CODE: 992JD09 – 1 Fehrer pre-needle loom, yoc: 1991, ww: 3.7 m, 3 379 needles/m Photos available upon request

CODE: JHEZ821 – 1 Automatex AG50/B pre-needle loom, yoc: 1990, ww: 3.7 m, single board upstroke, stroke: 40 mm, 5 000 needles/m, 900 rpm Photos

CODE: ZPNF333 – 1 Automatex PR50/T pre-needle loom, with batt feeding system, yoc: 1989, ww: 4 m, single board downstroke, stroke: 60 mm, 5 000 needles/m, 1 000 rpm
+ 1 Automatex AG50/B pre-needle loom, yoc: 1989, ww: 4 m, single board upstroke, stroke: 40 mm, 5 000 needles/m, 1 000 rpm Photos

CODE: ZPNF334 – 1 Automatex PR50/T pre-needle loom, with batt feeding system, yoc: 1989, ww: 4 m, single board downstroke, stroke: 60 mm, 5 000 needles/m, 1 000 rpm Photos

CODE: ZPNF335 – 1 Automatex AG50/B pre-needle loom, yoc: 1989, ww: 4 m, single board upstroke, stroke: 40 mm, 5 000 needles/m, 1 000 rpm Photos available upon request

CODE: JHEZ822 – 1 Automatex PR30/T pre-needle loom, yoc: 1990, ww: 4.1 m, single board downstroke, stroke: 60 mm, 3 000 needles/m, 900 rpm Photos

CODE: 672A918 – 1 Automatex PR30/T pre-needle loom, yoc: 1990, ww: 4.5 m, single board downstroke, 2 500 needles/m, 1 000 rpm Photos available upon request

 

Finishing needle looms

CODE: 4269HHY – 1 Dilo Di-loom OUG I 20 finishing needle loom, yoc: 1989, ww: 2 m, single board downstroke, single board upstroke, with Dilo cutting and winding unit Photos available upon request

CODE: NL33050 – 1 Dilo NFZ 22 finishing needle loom, with CBF, yoc: 1967, ww: 2.2 m, double board downstroke, 3 000 needles/m, stroke: 50 mm, 500 rpm Photos

CODE: NL33020 – 1 Dilo finishing needle loom, yoc: 1970s, ww: 2.5 m, double board downstroke, stroke: 60 mm, 5 000 needles/m, 600 rpm Photos

CODE: 8726GGA – 1 Dilo Di-loom OUG I HVXL 25 Hyperpunch finishing needle loom, with CBF, yoc: 2001, ww: 2.5 m, single board downstroke, single board upstroke, stroke: 60 mm, 14 144 needles/m, 1 200 rpm Photos

CODE: NL33040 – 1 Dilo Di-loom OD II 25 finishing needle loom, with CBF, yoc: 1990, ww: 2.5 m, double board downstroke, 8 834 needles/m Photos

CODE: NL33049 – 1 Dilo OUG II 25 finishing needle loom, with CBF, with winder, yoc: 1988, ww: 2.5 m, double board downstroke, double board upstroke, 16 000 needles/m, 1 300 rpm Photos

CODE: NL33037 – 1 Dilo Di-loom OD II 25 finishing needle loom, with CBF, yoc: 1992, ww: 2.5 m, double board downstroke, 5 790 needles/m Photos

CODE: NL33038 – 1 Dilo OD II 25 finishing needle loom, yoc: 1984, ww: 2.5 m, double board downstroke, 8 834 needles/m Photos

CODE: NL33035 – 1 Dilo Di-loom OD II 25 finishing needle loom, with CBF, yoc: 1991, ww: 2.5 m, double board downstroke, 8 834 needles/m Photos

CODE: 373QHWA – 1 Dilo UD II 25 finishing needle loom, yoc: 1978, ww: 2.5 m, stroke: 60 mm, 600 rpm Photos available upon request

CODE: ZPUE3ZZ – 1 Fehrer NL 9/RS finishing needle loom, yoc: 1986, ww: 2.5 m, double board downstroke, 5 000 needles/m, 1 200 rpm Photos available upon request

CODE: 828SOOI – 1 Dilo Di-loom OD II SC 25 finishing needle loom, yoc: 1995, ww: 2.5 m, double board downstroke, stroke: 60 mm, 9 000 needles/m, 1 200 rpm Photos available upon request

CODE: NL33043 – 1 Fehrer NL 12 finishing needle loom, yoc: 1976, ww: 2.64 m, double board downstroke, stroke: 60 mm, 6 000 needles/m, 1 200 rpm Photos

CODE: NL33045 – 1 Fehrer NL 28 pre-needle loom, yoc: 1976, ww: 2.64 m, single board downstroke, stroke: 60 mm, 1 000 needles/m, 800 rpm
+ 1 Fehrer NL 9 pre-needle loom, yoc: 1976, ww: 2.7 m, single board downstroke, stroke: 60 mm, 3 250 needles/m, 800 rpm
+ 1 Fehrer NL 12 finishing needle loom, yoc: 1976, ww: 2.64 m, double board downstroke, stroke: 60 mm, 6 000 needles/m, 1 200 rpm Photos

CODE: NL33026 – 1 TecTex PR50 pre-needle loom, with batt feeding system, yoc: 2016, ww: 2.8 m, double board downstroke, stroke: 70 mm, 3 500 needles/m, 1 100 rpm, with unit to turn the material backwards into the loom for second needling and hence machine can work as a finishing needle loom Photos

CODE: NL33014 – 1 Dilo OUG II 30 finishing needle loom, yoc: 1986, ww: 3 m, double board downstroke, double board upstroke, stroke: 40 mm, 16 000 needles/m, 1 200 rpm Photos

CODE: NL33051 – 1 Asselin finishing needle loom, yoc: 1980s, ww: 3 m, double board downstroke, double board upstroke, stroke: 60 mm, 1 000 rpm, with winder Photos

CODE: NL33034 – 1 Dilo OUG II 30 finishing needle loom, with CBF, yoc: 1990, ww: 3 m, double board downstroke, double board upstroke, stroke: 60 mm, 17 500 needles/m, 1 200 rpm Photos

CODE: 6263GT8 – 1 Fehrer NL 21/S finishing needle loom, yoc: 2001, ww: 3 m, double board downstroke, stroke: 35 mm, 4 000 needles/m, 2 000 rpm Photos available upon request

CODE: NL33015 – 1 Dilo OUG II 30 finishing needle loom, yoc: 1986, ww: 3 m, double board downstroke, double board upstroke, stroke: 40 mm, 16 000 needles/m, 1 200 rpm Photos

CODE: NL33013 – 1 Dilo OD II 35 finishing needle loom, yoc: 1986, ww: 3.5 m, double board downstroke, stroke: 40 mm, 8 000 needles/m, 1 200 rpm Photos

CODE: ZPHE9UU – 1 Dilo Di-loom OD II SCLHAV 35 Hyperpunch finishing needle loom, with CBF (yoc: 2019), yoc: 2007, ww: 3.5 m, double board downstroke, stroke: 40 mm, 12 000 needles/m, 1 900 rpm Photos

CODE: DSDH88I – 1 TecTex QP65 finishing needle loom, yoc: 2017 (as new, never worked!), ww: 6.5 m, double board downstroke, stroke: 60 mm, 10 000 needles/m, 1 200 rpm Photos

 

Structural needle looms

CODE: NL32976 – 1 Automatex structural needle loom, for velour, yoc: 1993, ww: 1.8 m, 10 000 needles/m, 1 200 rpm Photos

CODE: NL33047 – 1 Fehrer NL 11 structural needle loom, yoc: 1977, ww: 2.4 m Photos

CODE: PP32988 – 1 Dilo OD SV 25 structural needle loom, yoc: 1988, ww: 2.5 m Photos

CODE: 6256998 – 1 Dilo OD SV 25 structural needle loom, yoc: 1978, ww: 2.5 m Photos available upon request

CODE: NL32996 – 1 Dilo Di-loop SD 25 structural needle loom, yoc: 1979, ww: 2.5 m, with winder and unwinder Photos

CODE: NBVD662 – 1 Dilo Di-lour II S 30 structural needle loom, yoc: 2004, ww: 3 m Photos

CODE: VV6281A – 1 Dilo Di-loop DS 45 structural needle loom, yoc: 1989, ww: 4.5 m, with winder and unwinder Photos available upon request

CODE: IIJ21OO – 1 Dilo Di-loop VS 45 structural needle loom, yoc: 1990, ww: 4.5 m Photos

CODE: 838AHSA – 1 Fehrer NL 11 structural needle loom, yoc: 1974 – control and electrical panel from 2003, ww: 4.8 m, with winder Photos available upon request

CODE: NL33021 – 1 Fehrer NL 11 structural needle loom, yoc: 1974, ww: 4.9 m Photos

 

Stitch-bonding machines

CODE: ZPKDN81 – 1 Malimo stitch-bonding machine, yoc: 1985, ww: 1.6 m, gauge: 7 Photos

CODE: ZP726TT – 3 Malimo 14010 stitch-bonding machines, each machine is available separately, yoc: 1976, ww: 1.6 m, gauge: 18 Photos

CODE: ZP13HD9 – 1 Malimo Maliwatt stitch-bonding machine, yoc: 1992, ww: 2.4 m, gauge: 7, with winder Photos

CODE: TEGS778 – 1 Karl Mayer Maliwatt 14015 stitch-bonding machine, refurbished in 2013, ww: 3.6 m, gauge: 18 Photos available upon request

 

Ovens

CODE: TEGD887 – 1 Schott & Meissner press oven, yoc: 2014 – controls from 2016, ww: 1.6 m Photos

CODE: O32972 – 1 Santex thermobonding oven, yoc: 2000, ww: 2.4 m, double belt, 2 zones, cooling section, with Santex double cylinder thermobonding calender, yoc: 2000, ww: 2.7 m and Automatex longitudinal & cross cutting machine, yoc: 1986, ww: 2.6 m Photos

CODE: HYGD88I – 1 Bombi thermobonding oven, yoc: 2018 – never installed and still in the boxes, ww: 2.4 m, single belt, 2 zones Photos

CODE: RDFD88A – 1 Schott & Meissner thermobonding oven, yoc: 1995, ww: 2.5 m, double belt, 1 burner, cooling section Photos available upon request

CODE: O32975 – 1 Santex thermobonding oven, yoc: 1995, ww: 2.5 m, double belt, 4 zones, 2 cooling sections Photos

CODE: O32981 – 1 Bombi drum oven, with padder, yoc: 2004, ww: 2.5 m Photos

CODE: O32985 – 1 Bombi thermobonding oven, yoc: 2004, ww: 2.5 m, double belt, 3 zones, cooling section, calender Photos

CODE: ZPBBD82 – 1 Fleissner thermobonding oven, yoc: 2006, ww: 2.5 m, single belt, 2 zones, each zone is 3 m, speed: up to 14 m/min Photos

CODE: 5261GGS – 1 Bombi thermobonding oven, yoc: 2005, ww: 2.6 m, double belt, 3 zones, cooling section, calender, longitudinal & cross cutting machine Photos

CODE: O32982 – 1 Sicam thermobonding oven, yoc: 2008, ww: 2.8 m, double belt, cooling section, length: 28 m Photos

CODE: O32983 – 1 Bombi thermobonding oven, yoc: 2016, ww: 2.8 m, double belt, 3 burners, cooling section, calender Photos

CODE: O32971 – 1 Bombi drum oven, yoc: 2001, ww: 3.2 m, 2 pre-heating drums, 1 main drum, unwinder, accumulator, cutting and winding unit Photos

CODE: ZPFF861 – 1 Fleissner drum oven, refurbished in 2007, ww: 3.5 m, 6 drums Photos

CODE: O32958 – 1 Fleissner drum oven, with padder, yoc: 1983, ww: 4.15 m, 2 drums Photos

CODE: O32984 – 1 Santex Santatherm thermobonding oven, yoc: 1995, ww: 4.5 m, double belt, 2 burners, calender, cutting and winding unit Photos

CODE: O32956 – 1 Charvo thermobonding and spray-bonding oven, made in Germany, yoc: 1999, ww: 4.5 m, double belt, 2 burners, length: 15 m, speed: 30 m/minute, gas heated Photos

CODE: O32980 – 1 Fleissner drum oven, yoc: 1993, ww: 7 m Photos

 

Calenders

CODE: VXGS881 – 1 Comerio Ercole double cylinder thermobonding calender, yoc: 1996, ww: 1.6 m Photos available upon request

CODE: MHEY761 – 1 Monti laminating calender, yoc: 2014, ww: 1.8 m Photos available upon request

CODE: 928AJYE – 1 Bergi laminating calender, yoc: 2002, ww: 1.8 m Photos available upon request

CODE: CN32972 – 1 Beta double cylinder thermobonding calender, yoc: 1999, ww: 2.1 Photos

CODE: CN32970 – 1 Verduin double cylinder thermobonding calender, yoc: 1980s, ww: 2.2 m, with longitudinal cutting and winding unit Photos

CODE: 739GJUS – 1 Gribetz laminating machine, yoc: 2016, ww: 2.2 m Photos available upon request

CODE: CN32967 – 1 Ramisch Kleinewefers double cylinder thermobonding calender, yoc: 1988 – fully refurbished and modernized in 2019 (as new!), ww: 2.4 m, with unwinder, accumulator, longitudinal cutting and winding unit Photos

CODE: CN32969 – 1 Küsters double cylinder thermobonding calender, yoc: 1993, ww: 2.5 m Photos

CODE: XBDU881 – 1 Schott & Meissner double cylinder thermobonding calender, yoc: 1998, ww: 2.5 m Photos

CODE: 983AJJX – 1 Lemaire laminating calender with Caratsch scatter coating head, yoc: 2000, ww: 2.5 m Photos

CODE: RRET999 – 1 Comerio Ercole double cylinder thermobonding calender, yoc: 2006, ww: 2.5 m Photos

CODE: RRET998 – 1 Comerio Ercole double cylinder thermobonding calender, yoc: 2006, ww: 2.5 m Photos available upon request

CODE: JDFEI31 – 1 Olbrich double cylinder thermobonding calender, yoc: 1994, ww: 2.6 m Photos

CODE: CN32968 – 1 Ramisch Kleinewefers double cylinder thermobonding calender, yoc: 1993 (boiler refurbished in 2011), ww: 2.6 m, upgraded with touchscreen controls Photos

CODE: EGDA721 – 1 Küsters double cylinder thermobonding calender, yoc: 1978, ww: 2.6 m Photos available upon request

CODE: ZPDSA81 – 1 Santex double cylinder thermobonding calender, with cooling, yoc: 2014, ww: 2.7 m Photos available upon request

CODE: 263A871 – 1 Küsters triple cylinder thermobonding calender, yoc: 1985, ww: 3.2 m Photos available upon request

CODE: CN32959 – 1 Termoplast laminating calender, yoc: 1978 – refurbished in 2005, ww: 3.5 m Photos

CODE: ZP82OIZ – 1 Suchy cooling calender, yoc: 2008, ww: 3.5 m Photos available upon request

CODE: II88713 – 2 Ramisch Kleinewefers double cylinder thermobonding calenders, each machine is available separately, yoc: 1987 and 1990, ww: 4.7 m Photos available upon request

CODE: 8282II4 – 1 Bombi double cylinder thermobonding calender, yoc: 1998, ww: 5.7 m Photos

CODE: KDMFX25 – 1 Bombi triple cylinder thermobonding calender, yoc: 2007, ww: 5.8 m Photos

 

Padders (foulards)

CODE: PA32956 – 1 Küsters 222.50.1800 padder (foulard), yoc: 1983 – refurbished in 2020, ww: 1.8 m, with Matherm infrared field, yoc: 2015, winder, Hansa foam mixer, yoc: 1985 Photos

CODE: ZP7462A – 1 Corino padder (foulard), yoc: 2000, ww: 2 m Photos available upon request

CODE: 1458HHA – 1 Küsters padder (foulard), yoc: 1980s, ww: 2 m Photos available upon request

CODE: FGFS661 – 1 Beta padder (foulard), ww: 2 m Photos available upon request

CODE: ZP31399 – 1 Küsters padder (foulard), yoc: 1994, ww: 2.2 m Photos available upon request

CODE: SHFW618 – 1 Artos padder (foulard), yoc: 1986, ww: 2.2 m Photos available upon request

CODE: G2737RR – 1 Saben padder (foulard), yoc: 1993, ww: 2.4 m Photos available upon request

CODE: ZPTD771 – 1 Küsters 222.49.2400 padder (foulard), refurbished in 2008, ww: 2.4 m Photos available upon request

CODE: 9920JFC – 1 Beta D-FLC-3 padder (foulard), yoc: 1995, ww: 2.6 m Photos

CODE: ZP1HSYY – 1 Küsters 222.53.2600 padder (foulard), refurbished in 2020, ww: 2.6 m Photos available upon request

CODE: INJA82T – 1 Küsters 222.56.2800 padder (foulard), yoc: 1980 – refurbished in 2020, ww: 2.8 m Photos available upon request

CODE: 42TRUUY – 1 Küsters 222.53.2800 padder (foulard), yoc: 2000, ww: 2.8 m Photos available upon request

CODE: 9827YYQ – 1 Brückner padder (foulard), yoc: 2002, ww: 3 m Photos available upon request

CODE: 6263JFJ – 1 Küsters 222.17.3000 padder (foulard), yoc: 1982, ww: 3 m Photos available upon request

CODE: ZPYR891 – 1 Beta padder (foulard), ww: 3 m Photos available upon request

CODE: ZP928JJ – 1 Beta padder (foulard), yoc: 1996 – refurbished in 2020, ww: 3 m Photos available upon request

CODE: 425HKKU – 1 Küsters 222.11-3000 padder (foulard), refurbished in 2023, ww: 3 m Photos available upon request

CODE: 425HKKT – 1 Küsters 222.11.3000 padder (foulard), refurbished in 2023, ww: 3 m Photos available upon request

CODE: 425HKKA – 1 Beta padder (foulard), yoc: 1997, ww: 3 m Photos available upon request

CODE: 425HKKL – 1 Artos Babcock padder (foulard), yoc: 1990, ww: 3.2 m Photos available upon request

CODE: NHDE661 – 1 Beta padder (foulard), yoc: 1995, ww: 3.2 m Photos available upon request

CODE: ZP525UI – 1 Beta padder (foulard), yoc: 1988, ww: 3.2 m Photos

CODE: ZP525UT – 1 Beta padder (foulard), ww: 3.2 m Photos

CODE: ZPH7IUW – 1 Küsters 22.53.3200 padder (foulard), yoc: 2017, ww: 3.2 m Photos available upon request

CODE: ZPUIW96 – 1 Küsters 222.17.3200 padder (foulard), refurbished in 2019, ww: 3.2 m Photos available upon request

CODE: LDMM92I – 1 Beta FMC padder (foulard), yoc: 2004, ww: 3.4 m Photos

CODE: ZP8UZTR – 1 Küsters 222.56.3400 padder (foulard), yoc: 1983 – refurbished in 2019, ww: 3.4 m Photos

CODE: ZP525UX – 1 Beta padder (foulard), yoc: 2005, ww: 3.6 m Photos available upon request

CODE: 4241KKZ – 1 Brückner padder (foulard), yoc: 2020 – installed but never used, ww: 3.6 m Photos available upon request

CODE: ZPUYE96 – 1 Beta padder (foulard), yoc: 1997, ww: 3.6 m Photos available upon request

CODE: TDTG661 – 1 Küsters 222.54.4000 padder (foulard), yoc: 1995, ww: 4 m Photos

 

Winders, unwinders, cutting machines, cutting and winding units, slitter/rewinders, accumulators, roll packaging machines and lines:

Winders, unwinders

CODE: ZP82KUU – 1 ATF slitting winder, yoc: 2020, ww: 1.2 m Photos available upon request

CODE: HGVA881 – 1 Restatic winder, yoc: 2007, ww: 1.4 m Photos available upon request

CODE: NDBD882 – 1 Busch unwinder, yoc: 1994, ww: 2.5 m Photos available upon request

CODE: TESD821 – 1 MT slitting winder, yoc: 2008, ww: 2.5 m Photos

CODE: CU32995 – 2 Mettler winders, each machine is available separately, yoc: 1970s, ww: 2.5 m Photos

CODE: CU33014 – 1 A.Cellli winder, yoc: 1995, ww: 2.5 m Photos

CODE: 4263OIT – 1 Bastian slitting winder, yoc: 2008, ww: 2.8 m Photos available upon request

CODE: CU33006 – 1 Roberto Papini winder, yoc: 2005, ww: 3 m Photos

CODE: 334IZOU – 1 Brosiomeccanica unwinder and rewinder, yoc: 2000, ww: 3.6 m Photos available upon request

CODE: MDA939H – 1 Bastian slitting winder, yoc: 2011, ww: 3.9 m Photos

CODE: ZP6787M – 1 Calator winder, yoc: 1991, ww: 3.95 m Photos available upon request

CODE: PALD321 – 1 Hergeth winder, ww: 4.6 m Photos

CODE: JJ00JSA – 1 Neuenhauser winder, ww: 6 m Photos

CODE: CU33020 – 1 Edelmann winder, yoc: 1993, ww: 7 m Photos

 

Cutting machines

CODE: CU33024 – 1 FJ Edwards Besco cross cutting and winding unit, ww: 1.7 m, with unwinder Photos

CODE: MHDZ772 – 1 Lafer cross cutting machine, yoc: 1986, ww: 2 m Photos

CODE: CU32993 – 2 Macchi longitudinal cutting machines, each machine is available separately, yoc: 1970s, ww: 2.5 m Photos

CODE: CU32996 – 2 Macchi/Spinnbau longitudinal & cross cutting machines, each machine is available separately, yoc: 1970s, ww: 2.5 m Photos

CODE: CU32994 – 2 Spinnbau cross cutting machines, each machine is available separately, yoc: 1970s, ww: 2.5 m Photos

CODE: 8292JJS – 1 MG longitudinal cutting machine, ww: 2.6 m Photos available upon request

CODE: 717AGRE – 1 Manes longitudinal cutting machine, ww: 2.62 m Photos available upon request

CODE: 8281912 – 1 Tecnica Tessile cross cutting machine, yoc: 1994, ww: 3.3 m Photos available upon request

CODE: ZP6787L – 1 Görtz longitudinal cutting machine, yoc: 2008, ww: 3.5 m Photos

CODE: ZP982GH – 1 Schirp cross cutting machine, yoc: 1982 – refurbished in 2024, ww: 4.1 m Photos available upon request

CODE: ZP2112A – 1 Automatex longitudinal & cross cutting machine, refurbished in 2023, ww: 4.5 m Photos

CODE: CU33019 – 1 Autefa longitudinal & cross cutting machine, yoc: 1993, ww: 7 m Photos

 

Cutting and winding units

CODE: CU33025 – 1 James Bailey longitudinal cutting and winding unit, yoc: 1986, ww: 2 m Photos

CODE: ZPSAD66 – 1 Tomes cutting and winding unit, yoc: 2002, ww: 2.2 m Photos

CODE: CU33022 – 1 Technoplants cutting and winding unit, yoc: 2008, ww: 2.5 m, with accumulator, wadding compactor and roll packaging machine Photos

CODE: CU32997 – 2 Macchi/Mettler longitudinal cutting and winding units, each machine is available separately, yoc: 1970s, ww: 2.5 m Photos

CODE: CU32998 – 2 Spinnbau/Mettler cross cutting and winding units, each machine is available separately, yoc: 1970s, ww: 2.5 m Photos

CODE: CU32999 – 2 Macchi/Spinnbau/Mettler cutting and winding units, each machine is available separately, yoc: 1970s, ww: 2.5 m Photos

CODE: RE32981 – 1 Dilo cutting and winding unit, yoc: 1982, ww: 2.5 m Photos

CODE: CU33005 – 1 Roberto Papini cutting and winding unit, yoc: 2005, ww: 3 m Photos

CODE: ZP6787H – 1 Calator/Görtz longitudinal cutting and winding unit, yoc: 1991/2008, ww: 3.5 m Photos

CODE: CU33015 – 1 Neuhauser/Mohr cutting and winding unit with accumulator, yoc: 1991-2006, ww: 3.5 m Photos

CODE: CU32992 – 1 ETF cutting and winding unit, yoc: 1982, ww: 4.9 m Photos

CODE: JEZ6OO9 – 1 ETF cutting and winding unit, yoc: 1991 – refurbished in 2004, ww: 5 m, with accumulator, unwinder Photos available upon request

CODE: ZP212HF – 1 Autefa cutting and winding unit, refurbished in 2020, ww: 5 m Photos available upon request

CODE: CU33021 – 1 Autefa/Edelmann cutting and winding unit, yoc: 1993, ww: 7 m Photos

 

Slitter/rewinders

CODE: EE7382X – 1 Elletre slitter/rewinder, yoc: 1999, ww: 1.6 m Photos

CODE: HHDU771 – 1 Meridiana winding and slitting line, yoc: 1995-1998, ww: 2.2 m, consisting of: unwinder, slitter/rewinder Photos

CODE: ZPJDJAA – 1 A.Celli slitter/rewinder, yoc: 1995, ww: 2.24 m Photos available upon request

CODE: SR32956 – 1 A.Celli slitter/rewinder, yoc: 1995, ww: 2.5 m, 44 installed knives Photos

CODE: 1638JJZ – 1 Testa winding and slitting line, yoc: 1999, ww: 2.6 m, consisting of: unwinder, slitter/rewinder, roll wrapping Photos

CODE: II88714 – 2 Edelmann slitting winders, each machine is available separately, ww: 4.1 m Photos

 

Accumulators

CODE: ZPDSD00 – 1 IKS accumulator, yoc: 2008, ww: 3.5 m, capacity: 20 m Photos

CODE: AC32959 – 1 accumulator, yoc: 1993, ww: 7 m Photos

 

Roll packaging machines and lines

CODE: 92JDA99 – 1 SAC IMPAK roll packaging machine Photos available upon request

CODE: 1232II5 – 1 La Meccanica roll packaging machine, yoc: 1995, ww: 2 m Photos available upon request

CODE: ZPGA118 – 1 Hagemann roll packaging machine, yoc: 1993, ww: 2.5 m Photos

CODE: CU33022 – 1 Technoplants roll packaging line, yoc: 2008, ww: 2.5 m, consisting of accumulator, cutting and winding unit, wadding compactor, roll packaging machine Photos

CODE: RE32990 – 1 Technoplants roll and sheet packaging line, yoc: 2001, ww: 2.5 m Photos

CODE: ZP8282X – 1 Robopac roll packaging machine, yoc: 2008 – never installed and still in the boxes, ww: 5 m Photos available upon request

CODE: RE32985 – 1 Matthys roll packaging line, yoc: 2018, ww: 6.7 m Photos

CODE: RE32989 – 1 Hagemann roll packaging line, yoc: 1993, ww. 7 m Photos

 

Recycling:

Tearing machines and lines

CODE: ZPIURBB – 1 Laroche double drum tearing machine, yoc: 1990, ww: 500 m Photos available upon request

CODE: TE32989 – 1 triple drum tearing line, yoc: 1986-1990, ww: 600 mm (Click Here For Details) Photos

Consisting of:

1 Autefa triple drum tearing machine, yoc: 1986, ww: 600 mm
1 Autefa vertical bale press, yoc: 1986, bale weight: 250 kg
1 Pierret CT.60 guillotine cutter, yoc: 1990, ww: 600 mm
1 Pierret CT.28 R1 guillotine cutter, yoc: 1990, ww: 280 mm

CODE: 8282JJI – 1 Schirp double drum tearing machine, yoc: 1958, ww: 650 mm Photos available upon request

CODE: GDFW88X – 1 Casajuana single drum tearing machine, ww: 700 mm Photos

CODE: JFHW002 – 1 Laroche Junior double drum tearing machine, yoc: 1977, ww: 800 mm Photos

CODE: ZP65299 – 1 Laroche single drum tearing machine, yoc: 1998, ww: 1 m Photos

CODE: TE32988 – 1 Garnett Bywater single drum tearing machine, ww: 1 m Photos

CODE: 26GD881 – 1 Laroche Olympic single drum tearing machine, ww: 1 m Photos

CODE: TE32980 – 1 Laroche single drum tearing machine, yoc: 1980, ww: 1 m Photos

CODE: ZPSX661 – 1 Becherini double drum tearing machine, yoc: 1989 – refurbished in 2003, ww: 1 m Photos

CODE: ZP082HH – 1 Autefa triple drum tearing machine, yoc: 1991, ww: 1 m Photos

CODE: TE32985 – 1 Temafa single drum tearing machine, yoc: 2014, ww: 1.2 m Photos

CODE: TE32984 – 1 Rolando triple drum tearing line, yoc: 1972, ww: 1.2 m, consisting of: 1 Rolando triple drum tearing machine, ww: 1.2 m, 1 Rolando rotary cutter, ww: 550 mm Photos

CODE: 731A982 – 1 Laroche single drum tearing machine, yoc: 1990s, ww: 1.4 m Photos available upon request

CODE: IOO03SS – 1 Laroche single drum tearing machine, ww: 1.4 m Photos

CODE: ZP526UU – 1 Laroche Junior single drum tearing line, yoc: 1989 – refurbished in 2021, ww: 1.4 m, consisting of: 1 Laroche Junior single drum tearing machine, ww: 1.4 m, 1 Laroche vertical bale press (optional), bale weight: 200 kg Photos

CODE: VDDH663 – 1 Laroche Super Europ single drum tearing machine, yoc: 1985, ww: 1.4 m Photos

CODE: GDGJ991 – 1 Dell’Orco & Villani triple drum tearing line, yoc: 2003-2008, ww: 1.5 m (Click Here For Details) Photos

Consisting of:

1 Dell’Orco & Villani blending box, yoc: 2003
1 Dell’Orco & Villani triple drum tearing machine, yoc: 2003 (2 drums), yoc: 2008 (1 drum), ww: 1.5 m

CODE: TE32983 – 1 4-drum tearing line, yoc: 1990-2000, ww: 1.5 m (Click Here For Details) Photos

Consisting of:

1 Pierret robot, yoc: 1995
2 Pierret CT.60 guillotine cutters, yoc: 1995, ww: 600 mm
1 blending box
1 Laroche Jumbo 4-drum tearing machine, yoc: 2000, ww: 1.5 m
1 Autefa vertical double bale press, yoc: 1990, pressure: 70 tons

CODE: ZP24HHI – 1 Italiana Rigenerazione 5-drum tearing machine, yoc: 2002, ww: 1.5 m Photos

CODE: 627188A – 1 OCV 5-drum tearing machine, yoc: 1995, ww: 1.5 m Photos

CODE: ZP2AOIU – 1 4-drum tearing line, yoc: 1996, ww: 2 m (Click Here For Details) Photos available upon request

Consisting of:

1 Laroche 4-drum tearing line, ww: 2 m
1 Dell’orco & Villani blending box
1 Kavurlar vertical double bale press, bale weight: 350 kg

CODE: ZP777HA – 1 Gamba 5-drum tearing machine, yoc: 1992, ww: 2 m Photos available upon request

CODE: ZP182IX – 1 Margasa 5-drum tearing machine, yoc: 2011, ww: 2 m Photos available upon request

CODE: 239AOIY – 1 5-drum tearing line, yoc: 2023 – never installed, ww: 2 m (Click Here For Details) Photos

Consisting of:

1 Pierret CT.60 N guillotine cutter, ww: 600 mm
1 blending box
1 Andritz bale opener
2 Andritz Exel pickers
1 Andritz bale opener
1 Andritz Exel 5-drum tearing machine, ww: 2 m
1 vertical bale press, pressure: 100 tons
1 filtration unit

CODE: 772AJYT – 1 5-drum tearing line, yoc: 2010, ww: 2 m (Click Here For Details) Photos available upon request

Consisting of:

2 Pierret CT.60 guillotine cutters
1 Margasa 5-drum tearing machine, ww: 2 m
2 Dell’Orco & Villani blending boxes
1 Autefa vertical bale press

 

Rotary cutters

CODE: HSGU881 – 1 Mecatex rotary cutter (shredder), yoc: 2012 Photos available upon request

CODE: JDHW92M – 1 Pierret R14 rotary cutter, ww: 140 mm Photos available upon request

CODE: GSFS661 – 1 Llorpic rotary cutter, ww: 170 mm Photos available upon request

CODE: RC32960 – 2 Lidem rotary cutters (shredders), each machine is available separately, yoc: 2015 and 2016, ww: 300 mm Photos

CODE: ZP21IUD – 1 Rolando rotary cutter, yoc: 1982, ww: 400 mm Photos available upon request

CODE: 6263HHP – 1 Laroche rotary cutter, yoc: 2003, ww: 500 mm Photos available upon request

CODE: RC32961 – 1 Vecoplan rotary cutter (shredder), yoc: 2016, ww: 500 mm Photos

CODE: 2728UYZ – 2 Laroche rotary cutters, each machine is available separately, refurbished in 2023, ww: 500 mm Photos available upon request

CODE: 7239HHD – 1 Paoli rotary cutter, yoc: 2004, ww: 600 mm Photos available upon request

CODE: ZPDS551 – 1 Puggelli rotary cutter, refurbished in 2021, ww: 700 mm Photos available upon request

CODE: ZPTEY66 – 2 Puggelli rotary cutters, each machine is available separately, refurbished in 2022, ww: 700 mm Photos available upon request

CODE: ZPBV88X – 1 Laroche CR800 rotary cutter, yoc: 1995, ww: 750 mm Photos available upon request

CODE: ZPBV88Y – 1 Laroche CR800 rotary cutter, yoc: 1996, ww: 750 mm Photos available upon request

CODE: TEYS999 – 1 Weima rotary cutter (shredder), yoc: 2008, ww: 800 mm Photos available upon request

CODE: VDVEG991 – 1 Hollingsworth rotary cutter (shredder), yoc: 1994, ww: 900 mm Photos available upon request

CODE: ZP627YY – 1 Puggelli rotary cutter, ww: 1 m Photos available upon request

CODE: ZP28TRE – 1 Puggelli rotary cutter, yoc: 2002, ww: 1 m Photos available upon request

CODE: ZP009HH – 1 Gamba rotary cutter, fully refurbished and modernized in 2021 (as new!), ww: 1.8 m Photos

CODE: 15369JA – 1 Paoli rotary cutter, yoc: 1995, ww: 1.8 m Photos available upon request

CODE: 3241HAE – 1 Bonino rotary cutter, yoc: 1995, ww: 1.8 m Photos available upon request

 

Guillotine cutters

CODE: ZPDSA66 – 1 FGP guillotine cutter, refurbished in 2023, ww: 150 mm Photos

CODE: ZPJA812 – 1 Pierret G.28 guillotine cutter, yoc: 1989 – refurbished in 2022 (as new!), ww: 280 mm Photos

CODE: YSGD81T – 1 Pierret P.28 R1 guillotine cutter, yoc: 1995, ww: 280 mm Photos available upon request

CODE: 873A732 – 1 Pierret G.28 guillotine cutter, yoc: 1981, with new electrics, ww: 280 mm Photos

CODE: DGSU771 – 1 Pierret G.28 R1 guillotine cutter, yoc: 2007, ww: 280 mm Photos available upon request

CODE: 7983UUE – 1 Cometa guillotine cutter, ww: 500 mm Photos available upon request

CODE: ZP872II – 1 Reggiana guillotine cutter, ww: 500 mm Photos available upon request

CODE: UEYG882 – 1 Reggiana guillotine cutter, yoc: 1985, ww: 600 mm Photos

CODE: YSGD818 – 1 Pierret CT.60 guillotine cutter, yoc: 1981, ww: 600 mm Photos available upon request

CODE: ZP636JJ – 1 Cometa guillotine cutter, refurbished in 2019, ww: 700 mm Photos available upon request

CODE: GC32969 – 1 Dell’Orco & Villani guillotine cutter, yoc: 2011, ww: 700 mm Photos

CODE: HHDG881 – 1 Dell’Orco & Villani guillotine cutter, yoc: 2019, ww: 700 mm Photos

CODE: GH928OO – 1 Dell’Orco & Villani guillotine cutter, yoc: 1985, ww: 750 mm Photos available upon request

CODE: ZP129HA – 1 Mondejar guillotine cutter, refurbished in 2022 (as new!), ww: 1 m Photos available upon request

 

Edge trim openers

CODE: TGSA991 – 1 Scoleri edge trim opener, yoc: 1992, ww: 200 mm Photos available upon request

CODE: ZPJDS82 – 1 Scoleri edge trim opener, ww: 220 mm Photos available upon request

CODE: ZPJDS83 – 1 Scoleri edge trim opener, ww: 220 mm Photos available upon request

CODE: H829GTF – 1 Temafa edge trim opener, ww: 250 mm Photos available upon request

CODE: H829GTE – 1 Temafa edge trim opener, yoc: 2003, ww: 250 mm Photos available upon request

CODE: ZP92KUU – 1 Temafa edge trim opener, refurbished in 2023, ww: 250 mm Photos available upon request

CODE: GFVS620 – 1 Apri edge trim opener, yoc: 1991, ww: 300 mm Photos

CODE: 7381HAS – 1 Wilson Knowles edge trim opener, refurbished in 2023, ww: 300 mm Photos available upon request

CODE: H271IIO – 1 Tespra edge trim opener, yoc: 2005, ww: 350 mm Photos available upon request

CODE: JDHD881 – 2 Laroche edge trim openers, each machine is available separately, yoc: 2001 and 2003, ww: 500 mm Photos available upon request

CODE: ZP92KUT – 1 Temafa edge trim opener, refurbished in 2023, ww: 500 mm Photos available upon request

CODE: ZPGD66I – 1 Laroche edge trim opener, ww: 500 mm Photos

 

Garnetts

CODE: GA32956 – 1 Scoleri garnett, yoc: 2003, ww: 750 mm, 1 swift, with mixer, machine can be used instead of a tearing machine and instead of an edge trim opener Photos

CODE: ZP62GDJ – 1 Scoleri garnett, yoc: 2006, ww: 750 mm, 1 swift Photos available upon request

CODE: CQSPCZM – 1 Houget garnett, ww: 1.5 m, 1 swift with diameter of 750 mm Photos

CODE: ZP7262A – 1 Bywater garnett, ww: 1.5 m, 2 swifts Photos available upon request

CODE: ZPSQ991 – 1 P&C garnett, ww: 1.5 m, 2 swifts Photos available upon request

 

Bale presses:

Vertical bale presses

CODE: ZP88GGS – 1 Valvan vertical double bale press, yoc: 2012, bale weight: 100 kg, pressure: 20 tons Photos

CODE: ZP7DG9X – 1 Ormic vertical bale press, bale weight: 150 kg, pressure: 10 tons Photos available upon request

CODE: GDG727B – 1 Piferoen vertical double bale press, yoc: 1979, bale weight: 200 kg, pressure: 25 tons Photos available upon request

CODE: JEJ93KJ – 1 HSM vertical bale press, bale weight: 240 kg, pressure: 16 tons Photos

CODE: IU772HH – 1 Autefa vertical bale press, yoc: 1995, bale weight: 240 kg, pressure: 70 tons Photos

CODE: ZPHD779 – 1 Gualchierani vertical bale press, yoc: 1995, bale weight: 250 kg, pressure: 40 tons Photos

CODE: BP32966 – 1 Autefa vertical double bale press, yoc: 1988, bale weight: 250 kg, pressure: 70 tons Photos

CODE: 5261HHI – 1 Italiana Presse vertical bale press, yoc: 1985, bale weight: 300 kg, pressure: 20 tons Photos

CODE: 7319KKJ – 1 Gavazzi vertical bale press, yoc: 2002, bale weight: 300 kg, pressure: 40 tons Photos

CODE: TGDA551 – 1 Llorpic vertical bale press, bale weight: 300 kg, pressure: 50 tons Photos available upon request

CODE: 6202OIY – 1 Autefa vertical bale press, yoc: 1984, bale weight: 300 kg Photos available upon request

CODE: GDG727A – 1 Gualmec vertical double bale press, yoc: 1997, bale weight: 400 kg, pressure: 300 tons Photos available upon request

CODE: BP32968 – 1 Gualchierani vertical bale press, yoc: 1980s, pressure: 7 tons Photos

CODE: BP32967 – 1 Italiana Presse vertical bale press, yoc: 1980s, pressure: 10 tons Photos

CODE: 771A891 – 1 Dabizzi vertical bale press, pressure: 25 tons Photos available upon request

CODE: BP32982 – 1 Valvan vertical double bale press, yoc: 2018, pressure: 40 tons Photos

CODE: BP32983 – 1 Valvan vertical bale press, yoc: 1999, pressure: 40 tons Photos

CODE: 1325HTR – 1 Strautmann vertical bale press, pressure: 58 tons Photos available upon request

CODE: ZPGD720 – 1 Dabizzi vertical bale press, yoc: 2008, pressure: 60 tons Photos

CODE: G82HAAA – 1 Ken Mills vertical double bale press, yoc: 1988, pressure: 70 tons Photos available upon request

CODE: 4352JJU – 1 Gualchierani vertical bale press, pressure: 100 tons Photos

CODE: ZP124GA – 1 Italiana Presse vertical double bale press, yoc: 1996, pressure: 300 tons Photos

CODE: ZP4OGSA – 1 Gualchierani vertical double bale press, yoc: 2002, pressure: 300 tons, machine can be refurbished Photos

 

Horizontal bale presses

CODE: ZP123UI – 1 Hunkeler Systeme horizontal bale press, yoc: 1999, bale weight: 220 kg, pressure: 16 tons Photos available upon request

CODE: 093KFNJ – 1 Piferoen-Masquelet horizontal bale press, yoc: 1982, bale weight: 250 kg, pressure: 40 tons Photos available upon request

CODE: ZP99KJS – 1 BBC horizontal bale press, yoc: 1990, bale weight: 250 kg, pressure: 40 tons Photos

CODE: BP32969 – 1 Piferoen horizontal bale press, yoc: 1993, bale weight: 300 kg, pressure: 40 tons Photos

CODE: JSJS112 – 1 Ormic horizontal bale press, yoc: 2011, pressure: 17 tons Photos available upon request

CODE: ZP184HX – 1 Ormic horizontal bale press, yoc: 1990, pressure: 17 tons Photos available upon request

CODE: HDH8IIU – 1 Italiana Presse horizontal bale press, yoc: 1989, pressure: 20 tons Photos available upon request

CODE: ZP3225O – 1 LTG horizontal bale press, yoc: 1992, pressure: 20 tons Photos available upon request

CODE: LFNUD13 – 1 Autefa horizontal bale press, yoc: 1988, pressure: 20 tons Photos

CODE: LFNUD14 – 1 Austropress horizontal bale press, yoc: 2002, pressure: 20 tons Photos available upon request

CODE: LFNUD15 – 1 Austropress horizontal bale press, yoc: 2007, pressure: 20 tons Photos available upon request

CODE: BP32984 – 1 Werner & Weber horizontal bale press, yoc: 2016, pressure: 50 tons Photos

CODE: BP32971 – 1 Europress horizontal bale press, yoc: 1996, pressure: 50 tons Photos

CODE: REEDYYY – 1 Piferoen horizontal bale press, yoc: 1999, pressure: 60 tons Photos available upon request

 

Other nonwoven and related machinery

CODE: RE32992 – 1 pillow filling line, yoc: 2022 (Click Here For Details) Photos

Consisting of:

1 Alfatex card, ww: 1 m
1 fan
1 Ipea blender
1 Ipea filling machine
1 Ipea shredder

CODE: 828UII8 – 1 Masias pillow filling line, yoc: 2001, consisting of: fan, vacuum aspiration, filling station with feeding silo, automatic bagging unit Photos available upon request

CODE: 3262IIU – 1 Limos pillow filling line, consisting of: bale opener, tearing machine, filling station with feeding silo Photos

CODE: CL33033 – Felting line, yoc: 1976, ww: 2.2 m (Click Here For Details) Photos

Consisting of:

3 Bonino single doffer cards
1 Automatex cross-lapper
1 Cabis felting machine

CODE: CL33034 – Felting line, yoc: 1976, ww: 2.2 m (Click Here For Details) Photos

Consisting of:

3 Bonino single doffer cards
1 Automatex cross-lapper
1 Cabis felting machine

CODE: CL33035 – Felting line, yoc: 1976, ww: 2.2 m (Click Here For Details) Photos

Consisting of:

3 Bonino single doffer cards
1 Automatex cross-lapper
1 Cabis felting machine

CODE: ZPHS122 – 1 Dilo CBF batt feeding system, yoc: 1987, ww. 2.5 m Photos available upon request

CODE: ZP63FA1 – 1 Protner face mask production line, yoc: 2021, speed: 110 m/min, with stacker Photos available upon request

CODE: RE32977 – 1 Suchy nonwoven printing machine, yoc: 2017, ww: 3.5 m, up to 80 m/min Photos

CODE: IFN942I – 1 Benz foam mixer, yoc: 1980 Photos available upon request

CODE: ZPGDG37 – 1 Hansa foam mixer, yoc: 1987 Photos

CODE: ZPSJD88 – 1 Stork foam mixer, yoc: 1994 Photos available upon request

CODE: ZPSFG66 – 1 Mondomix foam mixer Photos available upon request

CODE: ZP152OY – 1 Hansa foam mixer Photos available upon request

CODE: 9922HST – 1 Hansa foam mixer, yoc: 1997 – refurbished in 2023 Photos available upon request

CODE: 772AYTE – 1 Bombi foam mixer, yoc: 2001 Photos

CODE: DADD881 – 1 Mondomix foam mixer Photos available upon request

CODE: GFDE992 – 1 Jantex foam mixer, yoc: 2007 Photos

CODE: ZP2720I – 1 Gavazzi bale cutter, yoc: 1998, ww: 1 m Photos

CODE; ZP152UU – 1 Puggelli bale cutter, ww: 1 m Photos available upon request

CODE: 5241GSL – 1 Italpresse bale cutter, yoc: 1989, ww: 1.1 m Photos available upon request

CODE: 5JDA891 – 1 Amadori bale cutter, yoc: 1988, ww: 1.1 m Photos available upon request

CODE: 0292HBA – 1 Rolando bale cutter, yoc: 1989, ww: 1.3 m Photos available upon request

CODE: RE32984 – 1 MAK/Spinnbau hopper feeder, yoc: 1965, ww: 2 m Photos

CODE: ZP152UZ – 1 Hergeth hopper feeder, ww: 2 m Photos

CODE: ZPCSCD2 – 1 HDB hopper feeder, yoc: 1980s, ww: 2.2 Photos

CODE: 883JD02 – 1 Mackie hopper feeder, yoc: 1983, ww: 2.5 m Photos available upon request

CODE: 6281OUE – 1 HDB hopper feeder, yoc: 1991, ww: 2.5 m Photos available upon request

CODE: 6281OUI – 1 HDB hopper feeder, yoc: 1991, ww: 2.5 m Photos available upon request

CODE: RE32988 – 1 Temafa hopper feeder, refurbished in 1987, ww: 2.5 m Photos

CODE: ZPCSCD1 – 1 FOR hopper feeder, yoc: 1990 – refurbished in 2010, ww: 2.5 m Photos

CODE: ZP8271O – 1 HDB hopper feeder, yoc: 1991, ww: 2.5 m Photos

CODE: ZPHY38 – 1 Hergeth card feeding system, yoc: 1980, ww: 2.5 m Photos available upon request

CODE: ZP029GR – 1 Spinnbau card feeding system, ww: 2.5 m Photos available upon request

CODE: ZPJN821 – 1 Trützschler Scanfeed card feeding system, yoc: 2003, ww: 3 m Photos available upon request

CODE: RE32986 – 1 Trützschler Scanfeed card feeding system, yoc: 2002, ww: 3.5 m Photos

CODE: RE32970 – 2 Hergeth step cleaners, each machine is available separately, yoc: 1985 Photos

CODE: RE32969 – 1 Fleissner carpet dyeing line, for woven and nonwoven carpets, yoc: 1991-1996, ww: 5.2 m, with color preparation, speed: 8 m/min
Length: 41 m, width: 11 m, height: 6.5 m Photos

CODE: ZP392II – 1 Ramina wadding compactor, ww: 2.7 m, machine is used to compresses and pack nonwoven wadding rolls Photos

CODE: RE32980 – 1 Temafa bin emptier, yoc: 1983, ww: 4.5 m Photos

CODE: RE32983 – 1 Sitma shrink wrapping machine Photos